Icom IC-4088SR Instruction Manual

Pages 32

Year 0

Language(s)

of 32

Icom IC-4088SR Transceiver Specification

The Icom IC-4088SR is a robust, license-free transceiver designed for seamless communication over short distances, suitable for both recreational and professional use. Operating in the PMR446 band, it offers 40 channels with a frequency range from 446.00625 to 446.09375 MHz, ensuring clear communication in various environments. This compact transceiver is powered by three AA batteries, providing up to 40 hours of operating time, and includes an energy-saving function to extend battery life.

The IC-4088SR features a 500mW RF output power, delivering reliable communication within a typical range of up to 3 kilometers, depending on environmental conditions. Its built-in VOX function allows for hands-free operation, enhancing user convenience. The transceiver is equipped with a large, easy-to-read LCD display that shows channel information and battery status at a glance. Users can utilize the 38 CTCSS and 83 DCS tone codes for privacy and interference-free communication.

Durability is a key aspect of the Icom IC-4088SR, with its rugged construction meeting IPX4 standards for water resistance, making it suitable for outdoor activities. Its ergonomic design ensures comfortable handling during extended use. The transceiver also includes a call alert function, offering five selectable tones to notify users of incoming calls. An optional speaker-microphone accessory further enhances its functionality.

The Icom IC-4088SR is a versatile, user-friendly transceiver that combines reliable performance with practical features, making it an ideal choice for various applications such as hiking, camping, and professional coordination tasks where easy communication is essential.

Icom IC-4088SR Transceiver F.A.Q.

How do I reset the Icom IC-4088SR to factory settings?

To reset the Icom IC-4088SR to factory settings, turn off the transceiver. Press and hold the 'PWR' button while turning the device on. Continue holding until the display shows 'CL', indicating a successful reset.

What is the proper way to charge the batteries for the IC-4088SR transceiver?

Use the supplied charger or a compatible one recommended by Icom. Insert the batteries into the charger and plug it into a suitable power outlet. Charging typically takes around 10 hours. Ensure the batteries are fully charged before use.

How can I improve the transmission range of the IC-4088SR?

To improve transmission range, ensure the antenna is fully extended and the transceiver is held upright. Avoid obstructions such as buildings or hills. Using the transceiver in an elevated location can also enhance range.

What should I do if the IC-4088SR is not turning on?

First, check if the batteries are correctly installed and fully charged. If the issue persists, try replacing the batteries with new ones. Inspect the battery contacts for any dirt or corrosion and clean if necessary.

How do I change the channel on the IC-4088SR?

To change the channel, press the 'CH' button on the transceiver. Use the up and down buttons to scroll through available channels. Release the buttons once the desired channel is shown on the display.

What is the function of the 'Monitor' button on the IC-4088SR?

The 'Monitor' button allows you to temporarily disable the squelch and listen to weak signals. Press and hold the button to activate monitor mode, and release it to return to normal operation.

How can I lock the keypad on the IC-4088SR to prevent accidental changes?

To lock the keypad, press and hold the 'FUNC' button followed by the 'LOCK' button. The display will show a key icon indicating the keypad is locked. Repeat the process to unlock the keypad.

What should I do if I experience interference on my IC-4088SR?

Try changing to a different channel to avoid interference. Ensure that no electronic devices causing RF interference are nearby. If interference persists, check if other transceivers in the vicinity are on the same channel.

How do I adjust the volume on the IC-4088SR?

To adjust the volume, use the 'VOL' buttons on the transceiver. Press the 'UP' button to increase volume and the 'DOWN' button to decrease it. The current volume level is shown on the display.

Can the IC-4088SR be used with a headset?

Yes, the IC-4088SR is compatible with headsets. Connect the headset to the accessory jack on the side of the transceiver. Ensure the headset is designed for use with Icom transceivers for optimal performance.