Hyundai Veloster Turbo 2016 Quick Reference Guide

To reset the TPMS, ensure all tires are inflated to the recommended pressure. Turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button until the TPMS indicator blinks three times, then release the button. Drive the car for at least 20 minutes at speeds above 25 mph to reset the system.
The recommended oil type for a 2016 Hyundai Veloster Turbo is 5W-30 or 5W-40 synthetic motor oil. Always check your owner's manual for the most accurate specifications.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements are performed. Keep tires properly inflated, avoid excessive idling, and drive at moderate speeds. Consistent maintenance of the turbo system can also enhance fuel efficiency.
If the check engine light illuminates, first ensure your gas cap is tightened securely, as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to check for diagnostic trouble codes (DTCs) and address any issues indicated. If unsure, consult a professional mechanic.
The spark plugs should generally be replaced every 60,000 to 100,000 miles. However, it's advisable to check the owner's manual for the specific recommended interval for your vehicle.
The recommended tire pressure for a 2016 Hyundai Veloster Turbo is typically 33 PSI for both the front and rear tires. Check the sticker inside the driver's door jamb for exact specifications.
To replace the cabin air filter, open the glove box and remove the dampener arm. Push in the sides of the glove box to release it. The filter housing will be visible behind the glove box. Remove the cover, take out the old filter, and insert the new filter, ensuring it is oriented correctly according to the airflow direction.
The 2016 Hyundai Veloster Turbo does not have a rated towing capacity. It is primarily designed as a sporty hatchback and is not recommended for towing.
To access the diagnostic codes, connect an OBD-II scanner to the port located under the dashboard on the driver's side. Turn the ignition to the "ON" position without starting the engine, and follow the scanner’s instructions to retrieve the codes.
Symptoms of a failing turbocharger may include a decrease in power, excessive exhaust smoke, a whining noise, and increased oil consumption. If you experience any of these symptoms, it's important to have the turbo system inspected by a professional.