Hyundai Elantra GT 2014 Quick Guide
![Hyundai Elantra GT 2014 Hatchback manual cover](/images/AvTUwudVGlOGzPwTLNWHkyAt/thumbs/thumb175x175.webp)
The recommended oil change interval for the 2014 Hyundai Elantra GT is every 7,500 miles or 12 months, whichever comes first. However, if you frequently drive in severe conditions, consider changing it every 3,000 to 5,000 miles.
It is recommended to use synthetic 5W-20 or 5W-30 motor oil for optimal performance and protection. Always check your owner's manual for the manufacturer's specifications.
To reset the TPMS, ensure all tires are inflated to the recommended pressure. Turn the ignition to the ON position without starting the engine, then press and hold the TPMS reset button until the light blinks three times.
The recommended tire pressure is 32 psi for both front and rear tires. Always check the label inside the driver's door for the most accurate information.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector, twist the bulb socket counterclockwise to remove it, and replace with a new bulb. Reconnect the power connector.
If the engine overheats, safely pull over and turn off the engine. Wait for the engine to cool before checking the coolant level. If it's low, add coolant. If the problem persists, have the vehicle inspected by a mechanic.
Maintain regular vehicle maintenance, such as timely oil changes and air filter replacements. Keep tires inflated to the recommended pressure and drive conservatively to improve fuel efficiency.
To connect your phone via Bluetooth, ensure Bluetooth is enabled on your phone. On the vehicle's audio system, navigate to the Bluetooth settings, select 'Add New Device,' and follow the prompts to pair your phone.
Signs of a failing alternator include dimming headlights, a dead battery, electrical issues, and the battery warning light on the dashboard. If you notice these symptoms, have the alternator inspected.
To replace the cabin air filter, open the glove box and remove the damper arm. Press in on the sides of the glove box to release it. Locate the filter cover behind the glove box, remove it, and replace the old filter with a new one.