Hyundai Elantra 2014 Quick Guide
![Hyundai Elantra 2014 Sedan manual cover](/images/jqTnanfkYKECNzFqOUffrnzj/thumbs/thumb175x175.webp)
To reset the TPMS on your 2014 Hyundai Elantra, first ensure that all tires are inflated to the recommended pressure. Then, drive the vehicle at a speed of at least 50 mph for 10 minutes. The TPMS should reset automatically. If it does not, consult your owner's manual or contact a dealership for further assistance.
The recommended oil type for the 2014 Hyundai Elantra is 5W-20 or 5W-30, depending on your climate and driving conditions. The engine oil capacity is approximately 4.2 quarts with a filter change. Always check the dipstick to ensure proper oil level.
To improve fuel efficiency, ensure your tires are properly inflated, use the recommended grade of motor oil, maintain a steady speed, and avoid excessive idling. Regular maintenance, such as changing air filters and spark plugs, can also enhance fuel economy.
Common causes include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the mass airflow sensor. It is recommended to use an OBD-II scanner to retrieve error codes and diagnose the issue accurately.
To change the cabin air filter, open the glove compartment and release the dampener arm on the right side. Squeeze the sides of the glove box inward to lower it fully. The cabin air filter is located behind a panel; remove the panel and replace the old filter with a new one.
The recommended tire pressure for the 2014 Hyundai Elantra is typically 32 psi for both front and rear tires. However, always refer to the placard located on the driver's side door jamb for the most accurate information.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. However, check your owner's manual for the manufacturer's specific recommendation based on your driving habits and conditions.
If your Elantra overheats, pull over safely and turn off the engine. Allow the engine to cool before checking the coolant level. Ensure the radiator and coolant reservoir are filled to the proper levels. If the problem persists, seek professional mechanical assistance.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector and the rubber dust cover. Release the bulb retaining clip, remove the old bulb, and insert the new bulb. Reassemble in reverse order.
The maintenance schedule typically includes oil and filter changes every 3,000 to 5,000 miles, tire rotations every 7,500 miles, and inspections of brakes, belts, and hoses every 15,000 miles. Always consult your owner's manual for the most accurate schedule.