Hyundai Veloster 2016 Quick Reference Guide
![Hyundai Veloster 2016 Hatchback manual cover](/images/rsfxBECqvnEkbrWNVIAGyxIj/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2016 Hyundai Veloster is typically 32 psi for both front and rear tires. However, always refer to the vehicle's manual or the sticker located on the driver's side door jamb for exact specifications.
To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Press the "Trip" button until the "Oil Life" screen is displayed. Press and hold the "Trip" button until the oil life resets to 100%.
Hyundai recommends using SAE 5W-30 or 5W-40 engine oil for the 2016 Veloster. Always check the owner's manual for specific oil grade and specifications.
To improve fuel efficiency, ensure your tires are properly inflated, use high-quality fuel, maintain regular engine servicing, avoid excessive idling, and drive at steady speeds without rapid acceleration.
The 2016 Hyundai Veloster is not designed for towing. It is recommended to avoid towing heavy loads with this vehicle to prevent potential damage to the engine and transmission.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the bulb cover, disconnect the electrical connector, and unclip the bulb. Replace it with a new bulb, ensuring it is properly secured and the connector is reattached.
The check engine light can be triggered by various issues such as a loose gas cap, faulty oxygen sensor, mass airflow sensor problems, or catalytic converter issues. It is advisable to run a diagnostic test to determine the exact cause.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. However, consult the owner's manual or a certified Hyundai service advisor for specific guidance based on your driving conditions.
To connect your smartphone, enable Bluetooth on your device. On the Veloster's infotainment system, navigate to the Bluetooth settings and select "Add New Device." Choose your phone from the list and confirm any prompts to complete the pairing process.
To jump-start the Veloster, connect the positive cable to the positive terminal on the dead battery, then to the positive terminal on the donor battery. Connect the negative cable to the donor battery's negative terminal, and the other end to a grounded metal surface on the Veloster. Start the donor vehicle, then the Veloster.