Hyundai Sonata 1.6T Eco 2018 Quick Reference Guide
![Hyundai Sonata 1.6T Eco 2018 Sedan manual cover](/images/JFjTqaAjqqZTMezYzXZRZgdf/thumbs/thumb175x175.webp)
To reset the TPMS on your 2018 Hyundai Sonata 1.6T Eco, ensure all tires are inflated to the recommended pressure. Turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button (usually located under the steering wheel) until the TPMS indicator blinks three times, then release the button. Start the vehicle and drive for a few minutes to allow the system to calibrate.
The recommended oil type for the 2018 Hyundai Sonata 1.6T Eco is SAE 5W-30 full synthetic oil. The engine oil capacity is approximately 4.8 quarts (4.5 liters) with a filter change.
To improve the fuel efficiency of your 2018 Hyundai Sonata 1.6T Eco, ensure regular maintenance such as oil changes and air filter replacements. Keep your tires properly inflated, avoid excessive idling, and drive at moderate speeds. Using cruise control on highways and removing unnecessary weight from the vehicle can also help improve fuel economy.
If the check engine light comes on in your 2018 Hyundai Sonata 1.6T Eco, first check for any loose fuel caps, as this is a common cause. If the problem persists, it's advisable to have the vehicle scanned for diagnostic trouble codes (DTCs) at a certified service center to identify and address the underlying issue.
To pair your phone with the Bluetooth system in your 2018 Hyundai Sonata 1.6T Eco, turn on Bluetooth on your phone and make it discoverable. On the vehicle's infotainment screen, go to the Bluetooth settings and select "Add New Device." Choose your phone from the list of available devices and confirm the pairing code displayed on both devices.
Common causes of reduced engine performance in the 2018 Hyundai Sonata 1.6T Eco include dirty air filters, faulty spark plugs, clogged fuel injectors, or issues with the turbocharger. Regular maintenance and timely replacement of parts can help prevent performance issues.
To replace the cabin air filter in your 2018 Hyundai Sonata 1.6T Eco, open the glove box and remove the damper arm. Push in the sides of the glove box to release it and lower it completely. Locate the cabin air filter cover behind the glove box, unclip it, and remove the old filter. Insert the new filter with the airflow direction arrow pointing down, secure the cover, and reinstall the glove box.
A rattling noise during acceleration in your 2018 Hyundai Sonata 1.6T Eco could be due to loose or damaged exhaust components, heat shields, or engine mounts. It is recommended to have a professional inspection to diagnose and resolve the issue.
To change the spark plugs on a 2018 Hyundai Sonata 1.6T Eco, first disconnect the battery. Remove the engine cover and ignition coil connectors. Unscrew the ignition coils and remove them. Use a spark plug socket to carefully remove the old spark plugs. Install the new spark plugs and torque them to the manufacturer's specifications. Reinstall the ignition coils, connectors, and engine cover.
If the air conditioning in your 2018 Hyundai Sonata 1.6T Eco is not cooling properly, check the refrigerant level, as low refrigerant can affect cooling performance. Inspect the cabin air filter for clogs and ensure the condenser is clean and unobstructed. If the issue persists, it may require professional diagnosis for potential compressor or electrical problems.