Contents

Your Device at a Glance
- Before you start, let's take a look at your new device.
- lTo power on your device, press and hold the power button until the screen turns on.lTo power off your device, press and hold the power button, and then touch .lTo restart your device, press and hold the power button, and then touch .lPress and hold the power button for 10 or more seconds to forcibly restart your device.
- Secondary microphoneLaser sensorRear cameraFlash / Color temperature sensorEarpieceCard slotPrimary microphoneUSB-C port / Headset jackSpeakerFingerprint scannerPower buttonVolume buttonAmbient light sensor / Optical proximity sensorFront cameraStatus indicatorInfrared sensor
Getting Started
- Follow the instructions in the following figures to set up your device. Please use the eject pin included.
- Single-SIM:Dual-SIM:
Dual Card Dual Standby Single Pass (dual-SIM devices only)
- Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.lWhen you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.lWhen you are using SIM card 1's data service, SIM card 2's data service will be disabled.Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions.You can go to Settings > Wireless & networks > Dual SIM settings, and enable Enable call forwarding between SIMs to avoid the conflicts mentioned above.
For More Information
- If you encounter any problems while using your device, you can obtain help from the following resources:
- lGo to Tips for function details and usage tips.lVisit http://consumer.huawei.com/en to view device information, frequently asked questions and other information.lVisit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region.
- Go to Settings and touch System > About phone > Legal to view legal information for your product.Go to Settings and touch System > About phone > Legal > Safety information to view safety information for your product.Go to Settings and touch System > About phone > Authentication info to view regulatory information for your product.Go to Settings and touch System > Certification logos to view more information on certification logos for your product.
- All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied.
Safety Information
- Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
- Operation and safety
- Disposal and recycling information
- Reduction of hazardous substances
- EU regulatory conformance (only applies to CLT-L09 / CLT-L29)
- Body worn operationThe device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- The highest SAR value reported for this device type when tested at the ear isCLT-L090.73 W/kgCLT-L290.73 W/kgAnd when properly worn on the body isCLT-L091.22 W/kgCLT-L291.22 W/kg
- StatementHereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification.This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.
- Restrictions in the 2.4 GHz band:Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund.
- Restrictions in the 5 GHz band:According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
- Frequency Bands and Power
- Accessories and Software Information
- FCC Regulatory Compliance
- Body worn operationThe device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- Certification information (SAR)This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.
- The highest SAR value reported to the FCC for this device type when using it at the ear isCLT-L091.03 W/kgCLT-L291.03 W/kgCLT-L041.03 W/kgAnd when properly worn on the body isCLT-L090.61 W/kgCLT-L290.61 W/kgCLT-L040.62 W/kgAnd when using the Wi-Fi hotspot function isCLT-L090.91 W/kgCLT-L290.91 W/kgCLT-L040.91 W/kg
- FCC statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment.
- Industry Canada compliance (only applies to CLT-L04)
- Body worn operationThe device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- The highest SAR value reported to the IC for this device type when using it at the ear isCLT-L041.03 W/kgAnd when properly worn on the body isCLT-L040.65 W/kg
- IC StatementThis device complies with CAN ICES-3 (B)/NMB-3(B).
- This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- Restrictions in the 5 GHz band:Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations.
Legal Notice
- Trademarks and Permissions
- Privacy Policy
- Copyright Huawei Technologies Co., Ltd. 2018. All rights reserved.

Huawei P20 Pro CLT-L04 Quick Start Guide

Huawei P20 Pro CLT-L04 Smartphone manual cover

Pages 14

Year 2018

Language(s)

of 14

Quick Start Guide

14 pages

User Guide

151 pages

Huawei P20 Pro CLT-L04 Smartphone Specification

The Huawei P20 Pro CLT-L04 is a flagship smartphone known for its advanced photography capabilities and robust performance. It features a 6.1-inch OLED display with a resolution of 1080 x 2240 pixels, providing vibrant colors and sharp details. The device is powered by the Hisilicon Kirin 970 processor, which includes an octa-core CPU configuration and is complemented by the Mali-G72 MP12 GPU, ensuring smooth multitasking and efficient power consumption. The P20 Pro is equipped with 6GB of RAM and 128GB of internal storage, though it lacks expandable storage options.

A standout feature of the Huawei P20 Pro is its Leica triple camera system that includes a 40 MP RGB sensor, a 20 MP monochrome sensor, and an 8 MP telephoto sensor, enabling exceptional photographic versatility and quality. The front-facing camera is 24 MP, designed for high-quality selfies and video calls. The device supports 4K video recording and offers numerous AI-enhanced photography modes.

The smartphone runs on EMUI 8.1, based on Android 8.1 Oreo, offering a user-friendly interface with customization options. Connectivity options include dual SIM capability, 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC, and USB Type-C. The P20 Pro is powered by a 4000 mAh battery, supporting Huawei's SuperCharge fast charging technology. It also has IP67 water and dust resistance, providing durability in various conditions. The design incorporates a glass front and back with an aluminum frame, available in a range of colors. The Huawei P20 Pro CLT-L04 combines cutting-edge technology with elegant design, making it a compelling choice for users seeking high performance and superior camera capabilities.

Huawei P20 Pro CLT-L04 Smartphone F.A.Q.

How can I take a screenshot on my Huawei P20 Pro CLT-L04?

To take a screenshot, press and hold the power button and the volume down button simultaneously for a few seconds until you see a flash on the screen.

How do I reset my Huawei P20 Pro CLT-L04 to factory settings?

Go to Settings > System > Reset > Factory data reset. Confirm by selecting 'Reset phone' and follow the on-screen instructions.

What should I do if my Huawei P20 Pro CLT-L04 won't charge?

First, check the charger and cable for any damage. Try using a different charger or outlet. If the problem persists, clean the charging port and restart the phone.

How can I improve battery life on my Huawei P20 Pro CLT-L04?

Reduce screen brightness, limit background app activity, use battery saver mode, and keep the software updated to improve battery performance.

Why is my Huawei P20 Pro CLT-L04 overheating?

Overheating can be caused by intensive apps, poor ventilation, or malware. Close unused apps, remove the case, and check for software updates to resolve the issue.

How do I update the software on my Huawei P20 Pro CLT-L04?

To update the software, go to Settings > System > Software update. If an update is available, download and install it following the prompts.

How can I free up storage space on my Huawei P20 Pro CLT-L04?

Delete unused apps, move files to the cloud or an SD card, clear cached data, and use the 'Storage Cleaner' feature in the Phone Manager app.

How do I enable developer options on my Huawei P20 Pro CLT-L04?

Go to Settings > About phone and tap 'Build number' seven times until you see a notification that developer options are enabled.

What should I do if my Huawei P20 Pro CLT-L04 is not connecting to Wi-Fi?

Ensure Wi-Fi is turned on, restart the phone and router, forget and reconnect to the network, and check for software updates.

How can I transfer data from my old phone to my Huawei P20 Pro CLT-L04?

Use the 'Phone Clone' app to wirelessly transfer contacts, messages, photos, and other data from your old phone to the new device.