Hoover FF195BWK Instruction Book
![Hoover FF195BWK manual cover](/images/dbfe005f8db9c5ffebee8acf/thumbs/thumb175x175.webp)
To install the Hoover FF195BWK, ensure it is placed on a flat, stable surface. Leave at least 5 cm of space on all sides for proper ventilation. Connect the refrigerator to a grounded electrical outlet. Allow it to stand upright for 4 hours before plugging it in to allow the compressor oil to settle.
Check if the temperature settings are correct and ensure the vents inside the refrigerator are not blocked. Verify that the door seals are clean and sealing properly. If the issue persists, unplug the unit for 5 minutes, then plug it back in. If the problem continues, contact Hoover customer support.
To defrost the freezer, remove all food items and unplug the refrigerator. Allow the ice to melt naturally or place a bowl of hot water inside to speed up the process. Clean the interior with a soft cloth and mild detergent, then dry thoroughly before turning the unit back on.
Regularly clean the condenser coils at the back of the refrigerator to ensure optimal performance. Check and clean the door seals monthly to maintain an airtight closure. Defrost the freezer when ice buildup exceeds 5 mm.
Unplug the refrigerator before replacing the light bulb. Locate the bulb cover inside the refrigerator, usually at the top. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Ensure the refrigerator is level to avoid vibrations. Check for loose items inside that may be rattling. The noises might also be due to the compressor or fans; if they persist, consult the user manual for further troubleshooting or contact customer support.
Yes, the shelves in the Hoover FF195BWK can be adjusted. Simply remove any items on the shelf, lift the shelf slightly, and pull it out. Reposition it at the desired height and slide it back into place.
First, turn off the water supply and unplug the refrigerator. Remove the water reservoir and wash it with warm, soapy water. Rinse thoroughly and dry before reassembling. Clean the dispenser nozzle using a small brush. Reconnect the water supply and plug the refrigerator back in.
Inspect the door seals for dirt or damage and clean them with a damp cloth. Ensure the refrigerator is level and that nothing inside is obstructing the door. If the problem persists, the seal may need replacing; contact Hoover for assistance.
Locate the control panel inside the refrigerator. Press the temperature adjustment buttons to set the desired temperature for both the fridge and freezer compartments. Refer to the user manual for optimal temperature settings.