Honda Ridgeline 2012 Navigation Manual
![Honda Ridgeline 2012 manual cover](/images/0ec0d2769c83c0fb5f6d8fff/thumbs/thumb175x175.webp)
For a 2012 Honda Ridgeline, it is recommended to use 5W-20 or 0W-20 synthetic motor oil for optimal performance and fuel efficiency.
To reset the maintenance minder, turn the ignition to the ON position, press the Select/Reset knob until the engine oil life indicator is displayed, then press and hold the knob until the oil life begins to blink. Release the knob, then press and hold it again until the oil life resets to 100%.
The 2012 Honda Ridgeline has a towing capacity of up to 5,000 pounds when properly equipped.
To change the cabin air filter, open the glove box, remove the damper arm, and press in on the sides of the glove box to lower it completely. Remove the filter cover, take out the old filter, and insert the new one, ensuring it is correctly oriented. Reassemble in reverse order.
The recommended tire pressure for a 2012 Honda Ridgeline is 32 psi for both front and rear tires.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, remove unnecessary weight, and drive smoothly by avoiding rapid acceleration and braking.
Common causes of battery drain include leaving lights on, a malfunctioning alternator, parasitic draw from electrical accessories, or a degraded battery. Regular checks and maintenance can help prevent these issues.
To replace the brake pads, lift the vehicle and remove the wheels. Unbolt the caliper and suspend it with a wire. Remove the old brake pads and install new ones. Reassemble the caliper and wheel, then repeat on the other side. Ensure to pump the brake pedal before driving.
If the check engine light comes on, check for loose gas caps as a simple fix. If the problem persists, use an OBD-II scanner to retrieve error codes or consult a mechanic for a thorough diagnostic.
To jump-start the Ridgeline, connect the positive cable to the positive terminals of both batteries, then connect one end of the negative cable to the negative terminal of the donor battery and the other end to a grounded metal surface on the Ridgeline. Start the donor vehicle, then the Ridgeline. Remove cables in reverse order.