Honda CR-V 2021 Navigation Manual

To connect your smartphone, ensure Bluetooth is enabled on your device. On the CR-V's infotainment screen, go to Settings > Bluetooth/Wi-Fi. Select 'Bluetooth Device List' and then 'Add Bluetooth Device'. Follow the prompts to pair your phone.
Honda recommends using SAE 0W-20 viscosity oil for the 2021 CR-V. Ensure the oil meets the API Certification Seal for best performance.
To reset the maintenance minder light, turn the ignition to the 'ON' position. Press the 'Home' button on the steering wheel and select 'Maintenance'. Choose 'Oil Life' and hold the 'Enter' button until the oil life resets to 100%.
If the AC isn't cooling properly, check the cabin air filter for clogs. Ensure the AC system is set to the correct mode and temperature. If the problem persists, there may be an issue with the refrigerant level or a system component, which requires professional inspection.
First, ensure the vehicle is on a level surface and turn on your hazard lights. Remove the spare tire, jack, and wrench from the trunk. Loosen the lug nuts slightly, lift the car with the jack, and then remove the lug nuts and tire. Replace with the spare, tighten the lug nuts by hand, lower the vehicle, and fully tighten the nuts.
If the CR-V doesn't start, check the battery connections for corrosion or looseness. Ensure the gear is in 'Park' or 'Neutral'. If the battery is low, jump-start the vehicle. If it still doesn't start, the issue may be with the starter or ignition switch.
To improve fuel efficiency, keep tires properly inflated, reduce excess weight, and use cruise control on highways. Also, perform regular maintenance, including oil changes and air filter replacements.
The recommended tire pressure for the Honda CR-V 2021 is 32 psi for both the front and rear tires. Always check the tire pressure when the tires are cold.
To use adaptive cruise control, press the 'MAIN' button on the steering wheel. Then, press the 'SET' button to set your desired speed. Use the 'RES/+/-' buttons to adjust the speed and maintain a safe following distance using the 'Distance' button.
To pair with Apple CarPlay, connect your iPhone to the CR-V's USB port using your phone's charging cable. Follow the on-screen instructions to enable CarPlay. Ensure Siri is enabled on your iPhone for full functionality.