Honda Clarity Fuel Cel 2021 Navigation Manual

To refuel the Honda Clarity Fuel Cell, locate a hydrogen fueling station, press the fuel door release button inside the car, and follow the instructions on the hydrogen dispenser. Make sure the nozzle is securely attached before starting the refueling process.
Check if the vehicle is in Park and ensure the key fob is inside the car. If the issue persists, inspect the battery charge level and consult the owner's manual for further troubleshooting or contact a Honda service center.
To maximize range, drive at moderate speeds, avoid aggressive acceleration, and use regenerative braking. Keep tires properly inflated and minimize the use of climate control systems when possible.
Regular maintenance includes tire rotations, brake inspections, and fluid checks. Specific components related to the fuel cell system should be inspected by authorized technicians at recommended intervals.
Turn the ignition to the ON position without starting the engine. Use the steering wheel buttons to navigate to the maintenance minder screen, then hold the "Enter" button until the display resets.
The recommended tire pressure is typically 36 psi for front tires and 36 psi for rear tires. Always refer to the sticker inside the driver's door for the most accurate information.
Enable Bluetooth on your phone and select "Honda Clarity" from the list of available devices. Follow any additional prompts to complete the pairing process. Ensure the vehicle is stationary during setup.
If the hydrogen fuel gauge is inaccurate, try resetting the system by turning the vehicle off and then on. If the problem persists, contact a certified Honda technician for a diagnostic check.
Visit the Honda navigation update website, download the latest map updates to a USB drive, and insert it into the vehicle's USB port. Follow the on-screen instructions to complete the update.
Open the hood and locate the air filter housing. Release the clips or screws holding the cover, remove the old filter, and install the new one, ensuring it is seated properly. Reattach the cover securely.