Honda Pilot 2021 Navigation Manual
![Honda Pilot 2021 manual cover](/images/77db505d41f13e25f439a251/thumbs/thumb175x175.webp)
To reset the maintenance light, turn on the ignition to the 'ON' position without starting the engine. Press the 'Trip' button until the maintenance screen appears. Press and hold the 'Trip' button for about 10 seconds until the maintenance light starts to blink. Release and press the button again for 5 seconds until the light resets.
The 2021 Honda Pilot typically requires 0W-20 full synthetic oil for optimal performance. Always refer to the owner's manual for the most accurate recommendations.
To connect your phone via Bluetooth, enable Bluetooth on your device. On the vehicle's infotainment system, select 'Phone,' then 'Connect Phone,' then 'Add Bluetooth Device.' Follow the prompts to pair and connect your phone.
The recommended tire pressure for the 2021 Honda Pilot is typically 35 psi for both front and rear tires. Check the placard on the driver's side door jamb for exact specifications.
To replace the key fob battery, use a small screwdriver to pry open the fob. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up. Snap the fob back together securely.
If your Honda Pilot won't start, check the battery connections and charge. Ensure the gear is in 'Park' or 'Neutral'. Check the fuses and starter connections. If issues persist, consult a professional technician.
The 2021 Honda Pilot has a towing capacity of up to 5,000 pounds when properly equipped with the towing package. Refer to the owner's manual for detailed information.
To update the navigation system, visit the Honda navigation update website. Download the update to a USB drive, then insert it into the vehicle's USB port. Follow on-screen instructions to complete the update.
If the air conditioning is not cooling, check the refrigerant level. Ensure the cabin air filter is clean. Inspect for any leaks or damage in the AC system. If unresolved, have a professional technician diagnose the issue.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Twist and remove the bulb holder, then remove the old bulb. Insert the new bulb without touching the glass, secure the holder back, and test the headlight.