Honda Insight 2019 Navigation Manual
![Honda Insight 2019 manual cover](/images/9d6f220345218b6fb3ae2214/thumbs/thumb175x175.webp)
To reset the maintenance light on a 2019 Honda Insight, turn the ignition to the "ON" position without starting the engine. Use the left-hand steering wheel controls to navigate to the "Maintenance Minder" screen. Hold the "Enter" button until the screen prompts you to reset, then select "Reset" to clear the maintenance light.
The 2019 Honda Insight typically requires 0W-20 synthetic oil for optimal performance and fuel efficiency. Always check the owner's manual for the most accurate information specific to your vehicle.
To improve fuel efficiency, maintain proper tire pressure, use the ECON mode, avoid aggressive driving, and ensure regular maintenance such as oil changes and air filter replacements. Additionally, remove unnecessary weight from the vehicle and reduce idling time.
Quick battery drain can be caused by leaving lights on, a faulty alternator, or parasitic draw from electronic devices. Check for any lights left on and have the battery and charging system inspected by a professional if the issue persists.
First, check the A/C settings and ensure they are correct. Verify that the A/C button is turned on and inspect the cabin air filter for clogs. If the issue continues, it could be due to a refrigerant leak or a faulty compressor, which will require professional service.
To replace the cabin air filter, open the glove box and remove the damper cord on the right side. Press the sides of the glove box inward to release it. The filter is located behind a cover; unclip the cover and replace the old filter with a new one, ensuring the airflow direction is correct.
Common causes for the check engine light include a loose fuel cap, faulty oxygen sensors, issues with the catalytic converter, or problems with the ignition system. Use an OBD-II scanner to retrieve the error codes for more precise diagnostics.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery and the other end to a grounded metal surface on the dead car. Start the booster vehicle and then the Insight.
It's recommended to change the transmission fluid every 30,000 to 60,000 miles, depending on driving conditions. Refer to the owner's manual for specific intervals and ensure that you use Honda-approved transmission fluid.
To pair your phone, turn on your phone's Bluetooth and set it to discoverable. On the Insight's touchscreen, press "Home," then "Settings," and select "Bluetooth" to begin pairing. Select your phone from the list and follow the prompts to complete the pairing process.