Honda Fit 2017 Navigation Manual
![Honda Fit 2017 manual cover](/images/ffdf53a07de4006a0be6cb1a/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the ON position. Press the trip button until you see the oil life percentage. Hold the trip button for about 10 seconds until the oil life starts flashing. Release and press the button again for 5 seconds until the oil life resets to 100%.
The recommended engine oil for the Honda Fit 2017 is 0W-20. It is important to use high-quality oil to ensure optimal engine performance and longevity.
A squealing noise when starting the vehicle could be due to a worn-out or loose serpentine belt. Inspect the belt for any signs of wear and ensure it is properly tensioned. Replace if necessary.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. However, refer to the owner's manual for the specific maintenance schedule for your driving conditions.
The recommended tire pressure for the Honda Fit 2017 is typically 33 psi for both front and rear tires. Always check the owner's manual or the tire placard located on the driver's side door jamb for the most accurate information.
To pair your phone, ensure Bluetooth is enabled on your device. On the car's display, go to 'Settings' > 'Bluetooth' > 'Add Bluetooth Device'. Follow the prompts to complete the pairing process using your phone.
If the check engine light illuminates, first ensure the gas cap is tightly secured. If the light remains on, have the vehicle's diagnostic codes read by a professional to determine the exact issue.
To improve fuel efficiency, maintain proper tire pressure, regularly service the engine, drive at moderate speeds, and avoid excessive idling. Removing unnecessary weight from the vehicle can also help.
Common causes of battery drain include leaving lights on, a faulty alternator, parasitic electrical draws, or an old battery. Ensure all electrical systems are off when the vehicle is not in use and have the battery and charging system tested if issues persist.
To replace the air filter, locate the air filter housing in the engine bay. Unclip or unscrew the housing cover, remove the old filter, and insert the new one. Ensure it is seated correctly before securing the housing cover.