Honda CR-Z 2014 Navigation Manual
![Honda CR-Z 2014 manual cover](/images/f226148a6c2cb146d4fdd9de/thumbs/thumb175x175.webp)
To reset the maintenance minder, turn the ignition to 'ON', press the 'Sel/Reset' button until the oil life indicator is displayed, hold the 'Sel/Reset' button until the display begins to blink, then release and hold the button again until the oil life resets to 100%.
The 2014 Honda CR-Z recommends SAE 0W-20 viscosity oil, which helps improve fuel efficiency and ensures optimal engine performance.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, proper tire inflation, and using the ECON mode to optimize driving performance.
If the CR-Z won't start, check the battery connections, ensure the battery is charged, examine the starter motor, and verify that the fuel system is functioning properly.
To replace the headlight bulb, open the hood, remove the headlight cover, disconnect the electrical connector, remove the old bulb, and install the new bulb, ensuring not to touch the glass with bare hands.
The recommended tire pressure for the Honda CR-Z is 32 psi for both front and rear tires, which ensures optimal handling and fuel efficiency.
The transmission fluid should be inspected regularly and changed approximately every 75,000 miles, or as specified in the owner's manual, to ensure smooth shifting and prolong transmission life.
Overheating may be caused by a low coolant level, a faulty thermostat, a clogged radiator, or a malfunctioning water pump. Check these components if overheating occurs.
To pair your phone, enable Bluetooth on your phone, press the 'Phone' button on the CR-Z's audio system, select 'Add Bluetooth Device', and follow the on-screen prompts to complete pairing.
Common brake issues include squeaking or grinding noises and reduced braking efficiency. These can be resolved by inspecting brake pads and rotors for wear, and replacing them if necessary. Regular brake fluid checks are also recommended.