Honda CR-V 2019 Navigation Manual

To reset the maintenance minder on your Honda CR-V 2019, turn the ignition to the on position without starting the engine. Use the steering wheel buttons to navigate to the maintenance menu, then hold the select/reset button until the maintenance reset option appears. Confirm the reset by selecting 'Yes'.
The recommended engine oil for a Honda CR-V 2019 is 0W-20. It is important to use oil that meets the API certification mark to ensure optimal performance and protection.
To improve fuel efficiency, ensure your tires are properly inflated, follow the recommended maintenance schedule, avoid excessive idling, and drive at a steady speed. Additionally, removing unnecessary weight from the vehicle can help.
If the check engine light comes on, check to ensure the gas cap is properly tightened, as this is a common cause. If the light remains on, consult a professional mechanic to diagnose and address any underlying issues.
To replace the cabin air filter, open the glove box and remove the dampener cord. Squeeze the sides of the glove box to release it. Locate the filter cover, remove it, and replace the old filter with a new one. Reassemble in reverse order.
To pair your phone, enable Bluetooth on your device. On the car's infotainment screen, navigate to 'Settings', then 'Bluetooth/Wi-Fi'. Select 'Bluetooth Device List' and then 'Add Bluetooth Device'. Follow the prompts on the screen and your phone to complete pairing.
The recommended tire pressure for a Honda CR-V 2019 is typically 32 PSI for both front and rear tires. Always check the vehicle's placard located on the driver's side door jamb for the most accurate information.
To check the transmission fluid level, warm up the engine and park on a level surface. Locate the transmission dipstick, remove it, wipe it clean, reinsert it fully, and then remove it again to check the fluid level. The fluid should be between the 'Full' and 'Low' marks.
If the battery dies, you can jump-start the vehicle using jumper cables and another car with a charged battery. Ensure both cars are off, connect the cables in the correct order, start the assisting vehicle, then the CR-V. Once started, remove the cables in reverse order.
To change a flat tire, ensure the vehicle is on a flat surface and safely parked. Loosen the lug nuts, jack up the vehicle, remove the lug nuts and the flat tire, replace it with the spare tire, hand-tighten the lug nuts, lower the vehicle, and then fully tighten the lug nuts.