Honda CR-V 2014 Navigation Manual

The recommended maintenance schedule for the Honda CR-V 2014 includes an oil and filter change every 7,500 miles, tire rotation every 7,500 miles, air cleaner element inspection every 15,000 miles, and brake fluid replacement every 3 years. Refer to the owner's manual for a full schedule.

To reset the oil life indicator, turn the ignition to the ON position without starting the engine. Press the Select/Reset button until the oil life is displayed. Press and hold the button for about 10 seconds until the oil life begins to blink. Release the button, then press and hold it again for 5 seconds until the oil life resets to 100%.

The recommended engine oil for a Honda CR-V 2014 is 0W-20 synthetic oil. It provides optimal fuel efficiency and engine protection. Always check the owner's manual for any updates or changes to oil specifications.

To replace the cabin air filter, open the glove box and remove the damper cord from the right side. Push in on both sides of the glove box to release the stops and lower it completely. The cabin air filter is located behind the glove box. Remove the old filter and insert a new one, ensuring the airflow direction is correct. Reassemble the glove box.

If your Honda CR-V 2014 won't start, check the battery connections for corrosion or looseness. Ensure the battery has enough charge. If the battery is fine, check the fuses related to the ignition system. If the problem persists, it may be an issue with the starter or ignition switch, which will require a professional diagnosis.

To improve fuel efficiency, ensure regular maintenance like oil changes and air filter replacements. Keep tires properly inflated, drive at steady speeds, and avoid rapid acceleration and braking. Removing excess weight and using cruise control on highways can also help improve fuel efficiency.

Common causes of a check engine light in a Honda CR-V 2014 include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the spark plugs or ignition coils. A diagnostic scan tool can help identify the specific cause.

To change the spark plugs, remove the engine cover to access the ignition coils. Disconnect the electrical connectors from the ignition coils, then remove the coils to access the spark plugs. Use a spark plug socket to remove the old plugs. Install new spark plugs, ensuring they are properly gapped, and reassemble the components.

If the air conditioning system is not working, check for blown fuses related to the A/C system. Ensure the refrigerant level is adequate and the compressor is engaging. If the system is still not functioning properly, it may require a professional diagnosis for issues like a faulty compressor or leaks in the system.

Unusual noises while driving could indicate several issues. Check for loose or worn-out components such as the exhaust system, suspension, or wheel bearings. Inspect the brakes for wear and ensure they are properly adjusted. If the noise persists, have a professional inspect the vehicle for a more accurate diagnosis.