Honda Accord Crosstour 2010 Navigation Manual
![Honda Accord Crosstour 2010 manual cover](/images/8f87ca953ad62a54ec2e57f1/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the "Select/Reset" button until the oil life indicator is displayed. Hold the "Select/Reset" button for about 10 seconds until the oil life starts to blink. Release and press the button again for five more seconds until the display resets to 100%.
The recommended tire pressure for the 2010 Honda Accord Crosstour is typically 32 psi for both front and rear tires. However, it's best to check the label on the driver's side door jamb for the most accurate information.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, proper tire inflation, and replacing air filters when needed. Additionally, avoid aggressive driving, reduce excess weight in the vehicle, and use cruise control on highways when possible.
The 2010 Honda Accord Crosstour typically requires 5W-20 synthetic oil for optimal performance. Always refer to the owner's manual for specific requirements and recommendations.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb, remove the rubber weather seal, and unclip the bulb retaining spring. Carefully remove the old bulb and insert the new one without touching the glass. Reassemble in reverse order.
Some common issues include rough shifting, delayed engagement, and transmission slipping. Regularly check and maintain the transmission fluid level and quality. If problems persist, consult a professional mechanic for a thorough inspection.
First, check the window lock switch to ensure it's not activated. Verify the fuse for the power windows isn't blown. If the fuse is intact, the issue may be with the window motor or switch, which might require professional diagnosis and repair.
The 2010 Honda Accord Crosstour has a towing capacity of around 1,500 pounds. It's important to use appropriate towing equipment and ensure the load does not exceed this limit for safety reasons.
To connect your phone, turn on the vehicle's ignition and enable Bluetooth on your phone. Use the vehicle's audio system to navigate to the Bluetooth settings menu. Select "Add a Device" and follow prompts to pair your phone, confirming the pin if necessary.
To change the air filter, open the hood and locate the air filter housing near the front of the engine bay. Unclip or unscrew the housing cover, remove the old filter, and insert a new one, ensuring it fits snugly. Secure the housing cover back in place.