Honda Accord 2017 Navigation Manual

The recommended tire pressure for the Honda Accord 2017 is typically 32 psi for both front and rear tires. However, always check the sticker on the driver's side door jamb for the exact specifications.
To reset the oil life indicator, turn the ignition to the "On" position without starting the engine. Use the buttons on the steering wheel to select the "Maintenance" menu, then choose "Oil Life" and hold the "Enter" button until the display resets to 100%.
The Honda Accord 2017 typically requires 0W-20 synthetic oil for optimal performance. Always refer to the owner's manual for specific recommendations.
Honda recommends changing the transmission fluid every 60,000 to 90,000 miles. However, check your owner's manual for specific maintenance intervals based on driving conditions.
To pair a phone, enable Bluetooth on your device and go to the Honda Accord's infotainment system. Select "Phone" on the display, then "Add Bluetooth Device," and follow the on-screen prompts to complete the pairing process.
First, check the refrigerant level and ensure the AC compressor is engaging. Inspect for any blown fuses or leaks in the system. If the issue persists, consult a professional mechanic.
If the check engine light is on, it's advisable to check for any obvious issues like a loose gas cap. If the light persists, use an OBD-II scanner to retrieve the error codes or visit a mechanic for diagnosis.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it, replace the bulb, and reinstall the socket by twisting it clockwise.
Ensure the engine is cold, then open the hood and locate the coolant reservoir. The level should be between the "Min" and "Max" marks on the side of the reservoir. Add coolant if necessary, using a 50/50 mixture of antifreeze and water.
To perform a factory reset, go to the "Settings" menu on the infotainment screen, select "System," then "Factory Data Reset," and follow the prompts to reset the system to its original settings.