Frigidaire GRSS2652AD Quick Start Guide

To reset the water filter indicator, press and hold the "Water Filter" button for 3 seconds until the light turns off.
Ensure the refrigerator is plugged in, the temperature setting is correct, and the vents are not blocked. If the problem persists, consider checking the condenser coils for dust and debris.
Check door seals for gaps or tears, ensure the door closes properly, and avoid leaving the door open for extended periods.
Remove the shelves and drawers, then wash them with warm soapy water. Rinse and dry thoroughly before placing them back into the refrigerator.
The recommended temperature is 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
Unplug the refrigerator, remove the light cover, and replace the bulb with a new one of the same type and wattage.
Unusual noises could be due to the refrigerator not being level, items inside rattling, or the compressor starting and stopping. Check and adjust these elements accordingly.
The GRSS2652AD features an automatic defrost system, so manual defrosting is not required.
Keep the refrigerator and freezer full but not overcrowded, ensure door seals are tight, and place the unit away from heat sources.
Check if the water supply line is connected and turned on, ensure the water filter is properly installed, and inspect for any kinks in the line.