Frigidaire GRFC2353AD Quick Start Guide

To clean the exterior, use a soft cloth and mild detergent. Avoid abrasive cleaners. For the interior, remove all food items, shelves, and drawers, then wash with a mixture of baking soda and water. Rinse and dry thoroughly before replacing items.
Check if the refrigerator is plugged in and the thermostat is set correctly. Ensure that the doors are sealing properly and not obstructed. Clean the condenser coils and make sure there is adequate air circulation around the unit.
The water filter should be replaced every 6 months or when the indicator light turns on, whichever comes first. This ensures clean and fresh-tasting water.
After a power outage, unplug the refrigerator for a few minutes, then plug it back in. Check the control panel to ensure it is functioning correctly and reset any settings if necessary.
Keep the refrigerator away from heat sources, ensure the door seals are tight, do not overload the fridge, and keep the temperature settings at the recommended levels of 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
Ensure the refrigerator is level, and check if it is in contact with any walls or cabinets that might cause vibrations. Also, check the fan and compressor for any obstructions or damage.
To change the interior light bulb, unplug the refrigerator, remove the light cover, unscrew the old bulb, and replace it with a new bulb of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Distribute food evenly to allow air circulation. Keep frequently used items at the front and heavier items in the lower shelves. Use drawers for specific categories like fruits, vegetables, and deli products to maintain freshness.
Ensure the door seals are tight and not damaged. Avoid leaving the freezer door open for extended periods. Regularly defrost if your model is not frost-free and avoid overpacking the freezer.
Perform a hard reset by unplugging the refrigerator for a few minutes, then plugging it back in. If the problem persists, check the user manual for specific troubleshooting steps or contact customer service.