Frigidaire FRFC2323AS Quick Start Guide
![Frigidaire FRFC2323AS manual cover](/images/cf9edc1de0afaddfbae269e6/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set the desired temperature for both the refrigerator and freezer compartments.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure that the temperature settings are correct and that the vents inside the fridge are not blocked by food items.
To clean the water filter, remove it by turning it counterclockwise. Rinse it under running water to remove any debris. If heavily soiled, consider replacing the filter.
Ice buildup can occur if the freezer door is not sealing properly. Check the door gasket for damage and ensure it closes tightly. Avoid opening the door frequently to minimize humidity.
The Frigidaire FRFC2323AS is a frost-free model, so manual defrosting is not required. However, if ice builds up, check for door seal issues or contact support.
It is recommended to clean the condenser coils every six months, check the door seals regularly, and replace the water filter every six months or as needed.
To reset the control panel, unplug the refrigerator for about 5 minutes and then plug it back in. This can help in resolving minor system glitches.
The refrigerator uses LED lighting. To replace it, locate the light cover, remove it, and replace the faulty LED with a new one of the same type.
Unusual noises can be due to ice build-up, items vibrating against the walls, or the compressor running. Ensure that the refrigerator is level and that items are not touching the sides.
To activate energy-saving mode, press the energy saver button on the control panel. This feature reduces the energy consumption of the refrigerator.