Contents

Contents
- 1 Safety and the environment
  - . Safety instructions 25
  - . Respecting the environment and saving energy 26
- 2 Description of your appliance
  - . NO FROST: its significance and operation 28
- 3 How to carry out your initial installation
  - . Reversing the direction the door opens 29
  - . Installing your appliance 31
  - . Electrical connection 32
- 4 How to use your freezer
  - . Setting the temperature 33
  - . Twist Ice (depending on the model) 34
  - . Specific areas of the freezer 35
  - . Frozen and deep-frozen food 36
  - . Preparing food for freezing 36
  - . Food freezing guide 37
  - . Arranging food in your freezer 40
  - . Quick freeze 40
  - . Defrosting food 41
  - . Automatic defrosting of your freezer 41
- 5 Ongoing maintenance of your appliance
  - . Cleaning your appliance 42
- 6 Noise, inconveniences and minor breakdowns
  - . Normal operating noises 43
  - . Inconveniences or minor breakdowns 43
  - . Clearit 41
  - This guide to installing and using your freezer is applicable to several models. There may be slight differences between your appliance's details and features and those described here.
  - As you read through the guide, you will come across the following symbols, to warn you of:
  - mSafety precautions that must be observed
  - h Danger of a gas bursting into flame
  - cAn electrical danger
    - e Important information and advice
Safety instructions
- This appliance is intended for domestic use only. It has been designed for preserving and freezing food.
- m The following instructions are for your own safety and should be observed without fail. We can neither be held responsible, no...
Respecting the environment and saving energy
Description of your appliance
NO FROST: its significance and operation
- This appliance has been designed and manufactured to avoid frost accumulating inside it.
- A system automatically melts away any frost and the water produced flows through a small pipe into the container provided, where it evaporates away.
- e You do not need to de-ice the appliance yourself.
Reversing the direction the door opens
- The doors normally open to the left (hinges on the right); if you wish to open the door to the right, you can modify the directi...
  - 1. Gently lay the appliance on its back.
  - 2. Unscrew the bottom screw (A) and remove it from the door. (drawing R1).
  - 3. Remove the hinge pin (keep the plastic spacers inserted on the pin).
  - 4. Screw the pin in the left hole (B) of the hinge and insert the plastic spacers.
  - 5. Unscrew the screw and remove the door rotation stop plate (C), turn it and insert it in the left slot on the bottom of the door, making the shorter part protrude. Block the plate with the screw (D) (drawing R2).
  - 6. Open the door at a 45 degree angle (E) and, gently pushing it toward the bottom (F), remove the top hinge pin (drawing R3).
  - 7. Remove the top pin on the left (H) (drawing R4).
  - 8. Remove the plate from the upper right hand part of the door (I) and insert it in the slot on the left.
  - 9. Insert the pin in the hole in the niche on the right on the top of the door.
  - 10. Remove the plate covering the top hinge and unscrew the hinge (M) (drawing R5).
  - 11. Remove the plate covering the left part of the top, rotate it and insert it in the slot where you removed the hinge (N).
  - 12. Position and fasten the hinge in the upper left part of the appliance and insert the cover plate.
  - 13. Insert the door in the left hinge, holding it open at a 45 degree angle and close the door.
  - 14. Insert the bottom hinge in the door using the spacers and fasten it with the screws.
  - 15. Stand up the appliance.
Reversing the direction the door opens
- Handle reversibility
Installing your appliance
- m Your appliance must be installed in compliance with the instructions given in this "Operating and installation instructions manual" in order to keep your food under optimum conditions and with optimal energy consumption.
- e Once you have installed your appliance, adjust its feet so that it is tilting backwards slightly: this helps the door to close correctly.
  - m Before placing any food in your appliance, clean it inside and out with a bicarbonate of soda solution (1 dessertspoon of bica...
Electrical connection
- c For your own safety, you must comply with the instructions given below.
  - The electrical installation must comply with Standard NF C *15-100, in particular concerning the Earth.
  - Three-core flex 3x2.5 mm, 230V single-phase connected to:
  - - A 20A single-phase 230V-50Hz supply
  - - An ELCB and an individual fuse (10 or 16A depending on the model)
  - We cannot be held responsible for any incident caused by faulty electrical installation.
- c Recommendations for the electrical installation of your appliance:
  - - Do not use extension leads, adaptors, or socket strips.
  - - Always make sure your circuit is earthed.
  - - The socket must always remain accessible, yet be out of the reach of children.
- c If you have any doubts, contact your installer.
  - m If the appliance has been delivered to your home in a horizontal position, stand it upright and then wait 2 hours before plugg...
- c Carry out an initial cleaning operation (see the section on "Installing your appliance") before connecting your appliance to t...
  - m "In case of damage, the supply cord must be replaced by the technical assistance service or a person with a similar title, in order to prevent any risk."
Setting the temperature
- Description control panel
  - - 1) temperatures led: -18C ; -22C ; -26C
  - - 2) green light: indicates that the appliance is working
  - - 3) thermostat: setting the temperature
  - - 4) super button: press to switch on/switch off the Super freeze function
  - - 5) super orange LED: indicates that the fast freeze function is working
  - - 6) red indicator light: temperature and open door alarm
- Setting the temperature
  - When starting your machine, set the thermostat to a medium position (the "ON" light is lit as well as one of the lights indicating the selected temperature). When the thermostat is on the Stand-by position, your freezer is off (the "ON" light is unlit).
- Quick Freeze function
  - This function enables you to freeeze a large quantity of fresh food very quickly.
  - Manual stop or automatic stop after 52 hours.
- Temperature alarm
  - A lit red warning light and audible alarm indicate that the freezer temperature is too high (for example: due to a power outage,...
  - - if the door is kept open for more than a minute.
  - - if a large amount of fresh foods are inserted in the freezer.
  - c The appliance is always powered.
    - m Prolonged opening of the door will cause the internal temperature to rise.
    - m Your appliance's internal temperature is closely linked to the ambient temperature, how frequently the door is opened and the amount and temperature of the food you have put in your appliance.
Twist Ice (depending on the model)
Specific areas of the freezer
Frozen and deep-frozen food
- Your domestic appliance enables you to freeze food: it lowers its core temperature rapidly and you can therefore keep it longer.
- Deep-freezing is an industrial process that is quicker and more intense that domestic freezing. The products you purchase from the shops are deep-frozen.
Preparing food for freezing
Food freezing guide
- Fresh meat
- Lamb,small pieces
- 8 months
- Roast pork
- 5 months
- Pork ribs
- 4 months
- Boiled beef,roast beef
- 10 months
- Beef steak,entrecotes,in sauce,roast veal
- 8 months
- Veal steaks,cutlets
- 10 months
- Minces meat
- 4 months
- Giblets,offal
- 3 months
- Sausages
- 2 months
- We recommend that you defrost meat completely before cooking it so as to avoid the exterior cooking quicker than the interior, except in the case of small breadcrumbed items, which can be sauted directly over a low to medium heat, and boiled meats.
  - Farmyard animals
- Prepare them plucked/skinned, gutted, cut into pieces if necessary, washed and rinsed.
  - Game
- Prepare it plucked/skinned, gutted, cut into pieces if necessary, washed and rinsed.
  - Fish
Food freezing guide
- Cooked food
- The length of time you can store cooked dishes reduces if you use bacon or smoked ham to season dishes.
- Put them directly on the hob or in the oven without defrosting them.
  - Vegetables
- We recommend that you blanch the vegetables with steam so that they do not lose their vitamins and mineral salts in the cooking water. You therefore do not need to wait until they are dry before freezing them, just until they cool down.
- In general, vegetables are better if they are cooked directly, without being frozen. Reduce the cooking time, taking into account the blanching time before freezing.
Food freezing guide
- Fruits
- Fruit must be covered with sugar or syrup, as appropriate. The amount of sugar to use is around 250g for 1 kilo of fruit. Syrups are used in varying percentages; these are prepared by boiling sugared water. The various concentrations are as follows:
  - - 30% solution, 450g of sugar per litre of water
  - - 40% solution, 650g of sugar per litre of water
  - - 50% solution, 800g of sugar per litre of water
- So that the fruit's colour does not change, place it in lemon juice before covering it with sugar or pour lemon juice into the s...
  - Bread
- This can be kept for 2 months. Defrost in an oven set to 50C, switching it on after inserting the bread.
  - Butter and cheese
- Freeze butter and cheese by dividing them up into pieces for weekly consumption.
- Butter and hard cheese (e.g. Parmesan) can be kept for 8 months, other cheese 4 months. They must be defrosted in the refrigerator, keeping an eye on the condensation that forms on these products.
Arranging food in your freezer
- Do not put fresh food next to food that has already been frozen to avoid causing the frozen food to warm up.
- e The maximum weight of food that you can freeze over 24 hours is shown on the information plate (inside your appliance's refrigerator section near the bottom of the left-hand wall) under the heading: "CAPACITE DE CONGELATION/FREEZING CAPACITY (kg/24h)".
Quick freeze
Defrosting food
- You can defrost food in five different ways:
- - By putting them in refrigerator for several hours
- - By leaving them to defrost gently at ambient temperature
- - In a conventional oven at a very low temperature (40/50C)
- - In a microwave oven
- - By cooking them immediately
- Defrosting them in the refrigerator is the slowest but safest method.
- m Never refreeze food once it has defrosted, even partially, without cooking it first.
- m We would advise you not to place any items you have just taken out of the freezer straight into your mouth (ice cream, ice cub...
Automatic defrosting of your freezer
- The defrosting of your appliance is completely automatic.
- The water resulting from defrosting drains into a recovery tank, located on the motor.
- The heat released by the motor causes the evaporation of the contents of this tank.
Clearit
- To keep your appliance in good working order, we recommend that you use Clearit household products.
- Professional expertise for the general public
- Clearit offers you professional products and adapted solutions for the daily upkeep of your household and kitchen appliances.
- You may find them in conventional retail outlets, along with a complete line of by-products and consumables.
Ongoing maintenance of your appliance
- c Disconnect your appliance prior to performing any maintenance operation. Grasp the plug directly, instead of pulling on the power cable.
- Cleaning your appliance
  - m We recommend that you clean and disinfect your appliance regularly for improved hygiene and to keep your food completely safe.
    - - Remove all the food from the freezer. Place it in isothermic bags or wrap it in newspaper and store it in a cool place.
    - - Clean your appliance inside and out with a bicarbonate of soda solution (1 dessertspoon of bicarbonate to 4 litres of water). Do not use alcohol, scouring powder or detergents, which could damage the surfaces.
  - m Do not use a high-pressure steam cleaner. The very hot steam could damage the surfaces and the electrical circuits; you would expose yourself to a risk of electrocution.
    - - Rinse with water, dry with a cloth.
    - - Don't forget to clean the condenser from time to time: this is at the back of the appliance (see the section on "Description of your appliance"). Use a dry paintbrush to do this or, better yet, your vacuum cleaner.
    - - Reconnect your appliance, and adjust the temperature if necessary, as shown in the section on "Adjusting your freezer's temperature ", and press the "Quick Freeze" button.
    - - Wait 3 or 4 hours before placing the food back in your appliance.
    - - After 24 hours, release the "Quick Freeze" button to stop this operation.
Noises, inconveniences or minor breakdowns
- Normal operating noises
  - So that the selected temperature remains constant, your appliance regularly switches off its motor. The resultant noises are qui...
- Inconveniences or minor breakdowns
  - Certain problems may appear when you are using your appliance. Before calling the after-sales service, use the guide below to see if you can resolve the problem yourself:
Noises, inconveniences or minor breakdowns
After sales service
- 17461920

Fagor ZJ13516 User Manual

Pages 23

Year 0

Language(s)

of 23

Fagor ZJ13516 Freezer Specification

The Fagor ZJ13516 Freezer is a meticulously engineered appliance designed to meet modern household freezing needs with efficiency and reliability. It has a total capacity of 135 liters, offering ample storage space for frozen goods, making it ideal for both small and medium-sized families. The freezer operates with an advanced cooling system that ensures uniform temperature distribution, thereby preserving food quality and extending shelf life. It features a manual defrost system, which, while requiring occasional maintenance, contributes to its energy efficiency. Powered by a high-efficiency compressor, the Fagor ZJ13516 maintains consistent performance even under varying environmental conditions. The appliance is equipped with a temperature control system allowing users to set the desired internal conditions precisely. Constructed with a robust exterior and insulated walls, the freezer minimizes energy consumption and maintains optimal internal temperatures. The door is designed for a tight seal to prevent cold air leakage, further enhancing its energy efficiency. Inside, the freezer is organized with removable shelves and compartments, providing flexible storage options to accommodate different sizes of frozen items. An interior light illuminates the contents for easy access, and the ergonomic handle design ensures comfortable operation. The Fagor ZJ13516 is designed to operate quietly, reducing noise pollution in the home environment. It comes with a reversible door hinge, offering flexibility in installation to fit various kitchen layouts. This model is designed to meet stringent safety standards and includes features like an indicator light that alerts users to any anomalies in temperature, ensuring peace of mind. The Fagor ZJ13516 Freezer represents a blend of functionality, efficiency, and modern design, making it a valuable addition to any home.

Fagor ZJ13516 Freezer F.A.Q.

How do I properly set the temperature on the Fagor ZJ13516 Freezer?

To set the temperature, locate the control panel on the freezer. Use the up and down arrows to adjust the temperature setting to your desired level. The recommended setting for optimal performance is typically around -18°C.

What should I do if my Fagor ZJ13516 Freezer is not cooling properly?

First, ensure the freezer is plugged in and the power is on. Check the temperature setting and make adjustments if necessary. Examine the door seals for any damage that might be allowing air to escape. Clean the condenser coils if they are dirty. If the issue persists, contact Fagor customer service for assistance.

How often should I defrost my Fagor ZJ13516 Freezer?

It is recommended to defrost your freezer once the frost build-up reaches approximately 1/4 inch (6mm) thick. Regular defrosting helps maintain the efficiency of the appliance.

How can I maximize the energy efficiency of my Fagor ZJ13516 Freezer?

Ensure the door seals are intact and clean. Keep the freezer in a cool, well-ventilated area, away from direct sunlight and heat sources. Avoid overloading the freezer and allow space for air circulation inside the unit. Regularly defrost and clean the appliance.

What are the steps for cleaning the Fagor ZJ13516 Freezer?

Turn off and unplug the freezer. Remove all food items and shelves. Clean the interior with a mixture of baking soda and warm water, then rinse with clean water. Dry thoroughly before replacing the shelves and food. Clean the exterior with a damp cloth.

How do I change the light bulb in the Fagor ZJ13516 Freezer?

Unplug the freezer. Locate the light cover inside the freezer compartment. Remove the cover by unscrewing or unclipping it, depending on the model. Replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the freezer back in.

Why is my Fagor ZJ13516 Freezer making unusual noises?

Unusual noises can be caused by the freezer not being level. Make sure the freezer is on a flat, stable surface. Check for any loose items inside that might be vibrating. If noises persist, it might indicate a mechanical issue requiring professional service.

How can I prevent ice build-up in my Fagor ZJ13516 Freezer?

Ensure the door is fully closed after each use. Avoid leaving the door open for extended periods. Check for proper sealing and replace damaged gaskets. Regularly defrost the freezer and avoid overloading it to ensure proper air circulation.

What should I do if the door seal on my Fagor ZJ13516 Freezer is damaged?

Inspect the seal for damage such as cracks or tears. If damaged, it should be replaced to maintain efficiency. Contact Fagor customer service or a qualified technician to order a replacement seal and have it installed.

How do I safely transport my Fagor ZJ13516 Freezer?

Empty the freezer and secure all moving parts. Defrost and clean the interior. Use a dolly to move the freezer, keeping it upright to prevent damage to the cooling system. Secure it during transport to prevent tipping. Allow it to settle for several hours before plugging it in at the new location.