Fagor 1FFD-23 User Manual
![Fagor 1FFD-23 Refrigerator manual cover](/images/fEylbUPdgrzfBVgIyyPclscl/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down buttons to set the desired temperature for both the fridge and freezer compartments.
First, check if the vents inside the refrigerator are blocked. Ensure the doors are sealing properly. If the issue persists, try cleaning the condenser coils and checking the temperature settings.
To defrost, turn off the refrigerator and remove all food items. Leave the doors open to allow the ice to melt. Place towels around the base to catch water. Once defrosted, clean and dry the interior before restarting the refrigerator.
This could be due to a blocked defrost drain. Check the drain hole at the back of the fridge and clear any debris using a pipe cleaner or a similar tool.
It is recommended to clean the condenser coils every six months to ensure efficient operation and prevent overheating.
Use a refrigerator-specific LED light bulb with the same wattage as the original bulb. Refer to the user manual for specifications.
Locate the water filter compartment, twist the old filter counterclockwise to remove it, and install the new filter by twisting it clockwise until secure. Run water through the new filter for a few minutes to flush any air or impurities.
Check the door seals to ensure they are airtight. If the problem persists, the defrost timer or heater might be malfunctioning, and you may need to contact a technician.
It is not recommended to store hot food directly in the refrigerator, as it can raise the internal temperature. Allow food to cool to room temperature before refrigerating.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the door seals clean and intact, and avoid overfilling the appliance to allow proper air circulation.