Fagor ZA1314 User Manual
![Fagor ZA1314 Refrigerator manual cover](/images/EImUETPuIACoMMYDxiCVQFHn/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature or counterclockwise to increase it. Allow 24 hours for the temperature to stabilize after adjustments.
First, check if the refrigerator is plugged in and the power is on. Ensure the thermostat is set to the correct temperature. Clean the condenser coils located at the back of the unit, and make sure the door seals are intact and sealing properly.
The Fagor ZA1314 is a frost-free model, so regular manual defrosting is not necessary. However, if you notice any ice buildup, it may indicate a door seal issue or a need for maintenance.
Regularly clean the condenser coils, check and clean the door seals, and ensure the drainage hole inside the refrigerator is clear. It's also advisable to wipe down the interior and exterior surfaces periodically.
Ensure the refrigerator is level on the floor, as uneven placement can cause noise. Check the back of the unit to ensure that it is not touching the wall or other objects. Also, inspect the fan for any obstructions.
Check the door seals for any debris or damage. Clean them with warm soapy water and ensure nothing inside the refrigerator is obstructing the door. If the problem persists, the door hinges may need adjustment.
To change the light bulb, first unplug the refrigerator. Locate the light cover inside the refrigerator, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Water pooling may be due to a clogged defrost drain. Locate the drain inside the refrigerator and use a pipe cleaner or warm water to clear any blockage. Ensure the refrigerator is level to prevent water from accumulating.
Ensure the door seals are clean and intact, and avoid placing the refrigerator near heat sources. Keep the refrigerator full but not overcrowded to maintain cold air circulation, and defrost food in the fridge to utilize the cooling effect.
Use a soft cloth and mild detergent to wipe down the exterior surfaces. Avoid abrasive cleaners or scouring pads that can damage the finish. For stainless steel models, a specialized cleaner can help maintain the shine.