Fagor WBF1114U User Manual
![Fagor WBF1114U Washing Machine manual cover](/images/CCwlHSuLPSlNwFrOoZfIjwvn/thumbs/thumb175x175.webp)
To reset the Fagor WBF1114U washing machine, turn off the machine and unplug it from the power source. Wait for about 1-2 minutes, then plug it back in and turn it on. This should reset the machine to its default settings.
Ensure that the power cord is properly plugged in and that the power outlet is working. Check if the door is securely closed, as the machine will not start if the door is open or not closed properly.
Remove the detergent drawer by pulling it out completely. Rinse it under warm water to remove any detergent residue and wipe it clean with a cloth. Ensure it is completely dry before reinserting it into the machine.
Error code E03 usually indicates a drainage issue. Check for any blockages in the drain hose or pump filter. Clear any obstructions and ensure the drain hose is not kinked before restarting the machine.
Excessive vibration can be caused by an unbalanced load. Ensure clothes are evenly distributed in the drum. Also, check if the machine is level and adjust the feet if necessary.
The pump filter should be cleaned every month to prevent blockages. Regular cleaning ensures optimal performance of the washing machine.
Regular maintenance includes cleaning the detergent drawer, door seal, and pump filter. Also, run an empty wash cycle with vinegar or a washing machine cleaner monthly to keep the drum fresh.
Ensure that the machine is level on the floor. Use anti-vibration pads under the feet of the machine to absorb vibrations and reduce noise during the spin cycle.
Check if the drain hose is blocked or kinked. Inspect the pump filter for any obstructions. Ensure that the drain height is not too high, which can prevent proper drainage.
Leave the door open after each wash to allow the drum to air dry. Clean the door seal regularly and use a washing machine cleaner every few months to prevent mold growth.