Fagor SFE-920CE User Manual

To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the door opening. Pull it out, remove any lint by hand or with a soft brush, and then reinsert it into its slot.
If the dryer is not starting, check if it is properly plugged in, verify that the door is fully closed, and ensure the power supply is on. Also, check the circuit breaker or fuse box for tripped breakers or blown fuses.
To prevent overdrying, use the moisture sensor drying mode if available or set a shorter drying time. Regularly check clothes for dryness before the cycle ends to avoid excess heat exposure.
Unusual noises can be caused by items caught in the drum or filter area, worn drum rollers, or loose components. Inspect the drum for foreign objects and check for wear and tear on moving parts.
The exhaust vent should be cleaned at least once a year to prevent lint build-up, which can reduce efficiency and pose a fire hazard. More frequent cleaning may be needed depending on dryer use.
Regularly clean the lint filter, check and clean the exhaust vent, inspect the drum and door seals for wear, and ensure the dryer is level to avoid vibrations.
If drying times are extended, check if the lint filter and exhaust vent are clean. Overloading the dryer can also cause longer drying times, so ensure the load size is appropriate.
To reset the dryer, turn it off and unplug it for a few minutes. Plug it back in, turn it on, and select the desired drying cycle.
If the dryer is not heating, check if the selected program requires heat. Ensure that the thermal fuse, heating element, and thermostat are functioning properly. Consider consulting a technician if the issue persists.
Yes, dryer sheets can be used in the Fagor SFE-920CE Dryer to reduce static and add fragrance to laundry. Ensure they are placed on top of the load to avoid getting caught in the machine's mechanisms.