Fagor SF-84E User Manual

To clean the lint filter, open the dryer door and locate the lint screen at the bottom of the opening. Pull it out, remove any lint, and wash it with warm water if necessary. Dry the filter completely before reinserting it into the dryer.
First, ensure the dryer is plugged in and the circuit breaker is not tripped. Check the door switch to ensure it's fully closed. If the problem persists, inspect the start switch and thermal fuse for continuity using a multimeter.
Check if the dryer is set to a heat cycle. Ensure the venting system is not obstructed. Inspect the heating element, thermal fuse, and thermostat for any faults. Consider consulting a professional if these components are not functioning properly.
Ensure the dryer is level and not overloaded. Check for loose items in the drum or foreign objects in the blower wheel. Tighten any loose screws on the dryer casing.
Clean the lint filter after every load, inspect the venting system for obstructions monthly, and clean the drum with a damp cloth to remove any residues or buildup.
Unplug the dryer from the power outlet, wait for a few minutes, and plug it back in. This may reset the control board. If the problem persists, consult the user manual or a technician.
Ensure the lint filter is clean and the venting system is clear. Check the load size and ensure it's appropriate for the dryer capacity. Test the thermostat and heating element for proper operation.
Remove clothes promptly after the drying cycle completes. Use the 'cool down' cycle if available and avoid overloading the dryer. Shake out garments before placing them in the dryer.
It's not recommended to dry shoes directly in the dryer as it can damage both the shoes and the dryer. Consider using a drying rack or air-drying them instead.
Refer to the user manual for specific error code meanings. Generally, unplug the dryer for a few minutes to reset it. If the code persists, consult a professional technician for further diagnosis and repair.