Fagor SF-800 User Manual
![Fagor SF-800 Dryer manual cover](/images/PbzpqVoXAJbOPdWewamaYvkN/thumbs/thumb175x175.webp)
To reset your Fagor SF-800 dryer after a power outage, unplug the appliance from the power outlet, wait for approximately 5 minutes, and then plug it back in. This will reset the electronic controls.
First, ensure that the dryer is properly connected to the power supply. Check the circuit breaker and reset if necessary. Clean the lint filter and ensure the vent hose is not blocked. If the issue persists, it may require professional servicing.
To clean the lint filter, open the door and locate the filter inside the door frame. Pull out the filter, remove any lint by hand or with a soft brush, and replace it securely before using the dryer again.
Ensure the lint filter is clean and the vent hose is not clogged. Overloading the dryer can also reduce efficiency, so try reducing the load size. Additionally, check the settings to ensure the appropriate drying cycle is selected.
To minimize wrinkles, remove clothes promptly after the cycle ends. Use the 'Anti-Crease' function if available, and avoid overloading the dryer. Selecting a lower heat setting can also help reduce wrinkles.
Regularly clean the lint filter and inspect the vent hose for blockages. Check and clean the moisture sensor if applicable. Annually, inspect the drum and seals for wear and tear.
Ensure the dryer is plugged in and the door is fully closed. Check the circuit breaker for any tripped switches. If using a delay start function, make sure it is set correctly. If the problem persists, consult the user manual or contact a service technician.
Refer to the user manual for a list of error codes and their meanings. Common codes may indicate issues such as overheating, door not closed, or sensor faults. Address the specific issue as recommended in the manual.
It is generally not recommended to dry shoes in a standard dryer due to potential damage to the shoes and the drum. If necessary, use a no-heat or air-dry setting and place the shoes on a shoe drying rack designed for dryers.
To change the drying program, turn the program selector knob to the desired setting. Ensure the dryer is powered on, and adjust other settings such as temperature or dryness level according to your needs.