Fagor SF-720CE User Manual
![Fagor SF-720CE Dryer manual cover](/images/YwDiIVrvDSTESJhHFtpancLj/thumbs/thumb175x175.webp)
To reset the Fagor SF-720CE Dryer, unplug the machine from the power outlet, wait for about 10 minutes, and then plug it back in. This can help clear any temporary errors.
Ensure that the dryer is plugged in, the door is properly closed, and the power supply is functioning. Check if the start button is working and inspect the circuit breaker.
Check if the heating element is functioning, inspect the thermal fuse, and verify that the thermostat is working correctly. Ensure that the dryer is not overloaded, which can prevent it from heating properly.
Locate the lint filter near the door opening. Remove it and clean off any lint accumulation. Rinse the filter under warm water and allow it to dry completely before reinserting it into the dryer.
Regularly clean the lint filter, inspect the vent system for blockages, and wipe down the drum and exterior surfaces. Check the power cord and connections for wear and tear.
Inspect the drum for any foreign objects, check the drum support rollers, and ensure that the blower wheel is not damaged. Tighten any loose screws or parts that may be causing noise.
Yes, the Fagor SF-720CE Dryer has a delicate cycle that uses lower heat settings to safely dry delicate fabrics. Always refer to garment care labels before drying.
Check if the drive belt is intact and properly aligned. Inspect the motor and drum rollers for any signs of wear. Ensure that the door switch is functioning correctly.
Ensure that the lint filter is clean and the dryer is not overloaded. Separate large loads into smaller ones, and verify that the vent system is clear of any blockages.
This could be due to an overheating issue, a faulty thermostat, or a problem with the moisture sensor. Check for blockages in the vent system and ensure the dryer is not overloaded.