Fagor SF-70CB User Manual
![Fagor SF-70CB Dryer manual cover](/images/xXrPolGIKndVJDJZpIxTydav/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom edge. Pull it out, remove any lint by hand, and rinse it under warm water if needed. Ensure it's completely dry before reinserting.
First, check that the dryer is plugged in and the circuit breaker is not tripped. Ensure the selected drying cycle includes heat. Clean the lint filter and check for blockages in the venting system. If the issue persists, consult a technician.
To reduce wrinkles, remove clothes promptly after the cycle ends. Use the appropriate drying cycle for the fabric type and consider using the 'anti-crease' function if available.
The maximum load capacity for the Fagor SF-70CB Dryer is approximately 7 kilograms. Do not overload the dryer to ensure optimal performance and prevent damage.
It is recommended to check and clean the exhaust vent every six months to ensure efficient operation and prevent fire hazards.
Unusual noises can be caused by items like coins or buttons hitting the drum. Ensure the dryer is level, and check for any loose items. If the noise persists, there might be an issue with the drum rollers or belt, requiring professional inspection.
To prevent shrinking, use a low heat setting or the 'air dry' option for delicate fabrics. Always check garment care labels before drying.
Ensure the dryer is plugged in and the door is fully closed. Check the household fuse or circuit breaker. If the dryer still does not start, it may require service from a professional technician.
Longer drying times can be due to a clogged lint filter or exhaust vent. Ensure both are clean. Also, check that the load size is appropriate and not too large for the dryer.
To improve energy efficiency, clean the lint filter after every use, ensure the exhaust vent is clear, use sensor drying cycles, and avoid overloading the dryer.