Fagor LVF27 User Manual

To reset the Fagor LVF27 dishwasher, press and hold the start button for about 3-5 seconds until the lights on the display panel blink. This will reset the system and clear any error codes.
First, check the drain hose for any kinks or blockages. Ensure that the sink drain is not clogged. Clean the dishwasher filter and inspect the pump for any debris. If the issue persists, consider contacting a professional technician.
To clean the filter, open the dishwasher and remove the bottom rack. Locate the filter at the bottom of the dishwasher, twist it counterclockwise, and pull it out. Rinse it under running water to remove any debris, then reinstall it by twisting it clockwise until it locks in place.
Place larger items like pots and pans in the bottom rack, ensuring they do not block the spray arms. Use the top rack for smaller items and cups, placing them upside down. Avoid overcrowding to ensure effective cleaning.
Spots can be caused by hard water. Ensure you are using a good quality rinse aid to help prevent spotting. Additionally, consider using a dishwasher detergent specifically designed for hard water conditions.
Use a high-quality dishwasher detergent in either powder, liquid, or tablet form. Follow the manufacturer's recommendations for dosage based on the water hardness and load size.
Regularly clean the filter and check for food debris. Run an empty cycle with a cup of vinegar placed on the top rack to eliminate odors. Ensure the dishwasher is ventilated properly between washes.
Regularly clean the filter and spray arms, check and clean the door seals, and inspect the drain hose for blockages. Run a cleaning cycle with a dishwasher cleaner every few months to maintain performance.
Unusual noises can be caused by items inside the dishwasher hitting each other or the spray arms. Check that dishes are loaded correctly. If the noise persists, inspect the spray arms and motor for any obstructions or wear.
Ensure the dishwasher door is fully closed and latched. Check that the power supply is connected and the circuit breaker is not tripped. Verify that the water supply is turned on. If these are all in order and the dishwasher still does not start, consult the user manual or a technician.