Fagor FT-7312N User Manual

To reset the Fagor FT-7312N washing machine, turn the power off and unplug it from the electrical outlet. Wait for about 5 minutes, then plug it back in and turn the machine on. This should reset the electronics and clear any error codes.
Ensure that the Fagor FT-7312N is properly plugged into a functional power outlet. Check that the door is closed securely and that the water supply is turned on. If these conditions are met and the machine still does not start, unplug it, wait for a few minutes, and then try again.
Remove the detergent drawer by pulling it out until it stops, then press down on the release lever to fully remove it. Rinse the drawer under warm water to remove any detergent residue. Use a brush to clean any stubborn residue, then dry it completely before reinserting it into the washing machine.
Excessive vibration can be caused by an uneven load or an unbalanced machine. Ensure that the washing machine is level by adjusting its feet. Also, try redistributing the load inside the drum to ensure even weight distribution. Avoid washing single heavy items and mix large and small items in each load.
Locate the filter access panel at the bottom front of the washing machine. Open the panel and unscrew the filter cap. Be prepared for some water to spill out, so have a towel or shallow container ready. Remove any debris from the filter, rinse it under running water, and then replace it securely.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, inspecting hoses for wear or leaks, and ensuring the machine is level. It's also recommended to run an empty hot wash cycle with a washing machine cleaner to prevent mold and detergent buildup.
If the washing machine is not draining, check if the drain hose is kinked or blocked. Inspect the filter for clogs and clean it if necessary. Also, ensure that the drain pump is functioning correctly. If these steps do not resolve the issue, there might be a fault with the pump or the control board.
Possible causes for the washing machine stopping mid-cycle include a power failure, water supply issues, or a door that is not properly closed. Check that the power cord is securely plugged in and that the water supply is turned on. Ensure the door is closed tightly and inspect for any error codes displayed on the machine.
Ensure the washing machine is level and not in contact with other objects. Check that the load is balanced and that there is no foreign object caught in the drum or pump. Using anti-vibration pads under the machine's feet can also help reduce noise.
Refer to the Fagor FT-7312N user manual to identify the meaning of the error code. Common issues can often be resolved by resetting the machine or addressing the specific problem indicated by the code, such as checking water connections or clearing blockages.