Fagor FT-313S User Manual
![Fagor FT-313S Washing Machine manual cover](/images/bdSXBFybXIUKlYpJrvyjrMgX/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add the appropriate amount of detergent. Select the desired wash program using the program dial. Press the start button to begin the cycle.
Ensure that the machine is properly plugged in and that the power outlet is working. Check if the door is closed properly and the water supply is turned on. If the problem persists, consult the user manual or contact customer support.
Locate the filter cover at the bottom front of the machine. Open it and unscrew the filter cap. Remove any debris, rinse the filter under running water, and replace it securely.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Run an empty hot wash cycle with a washing machine cleaner every few months to maintain hygiene.
Ensure the washing machine is level and on a stable surface. Check that the load is balanced inside the drum. Avoid overloading the machine. If the issue continues, inspect for worn-out shock absorbers or contact a technician.
Check for blockages in the drain hose or filter. Ensure the drain hose is not kinked or obstructed. If the problem persists, the pump may need servicing.
Yes, use the delicate or gentle cycle setting. Place delicate items in a mesh laundry bag for added protection. Use a mild detergent and avoid overloading the machine.
Leave the door slightly ajar when not in use to allow air circulation. Regularly clean the door seal and detergent drawer. Use a washing machine cleaner periodically to eliminate mold spores.
Check the door seal for damage or debris. Ensure hoses are securely connected and not cracked. Inspect the detergent drawer for blockages. If the issue remains, contact a service technician.
To reset the machine, turn it off and unplug it from the power source for a few minutes. Plug it back in and turn it on. If the issue persists, refer to the troubleshooting section in the user manual.