Fagor FS-6A User Manual

To adjust the temperature, locate the control panel inside the refrigerator. Use the up and down arrows to set your desired temperature. The recommended setting is between 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct and the vents inside the fridge are not blocked. If the issue persists, inspect the door seals for damage and clean the condenser coils.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow ice to melt naturally. Place towels at the base to absorb water. Once defrosted, clean the interior and plug it back in.
Water pooling can be due to a blocked defrost drain. To fix this, unclog the drain with warm water using a turkey baster or a small funnel. If necessary, remove debris manually with a pipe cleaner or similar tool.
It is recommended to clean the condenser coils every six months. This helps maintain energy efficiency and prevents overheating. Use a vacuum or a coil brush to remove dust and debris from the coils.
Store raw meats on the bottom shelf to prevent cross-contamination, keep dairy products on the upper shelves, and use the door for condiments. Ensure air circulation by not overloading shelves.
To change the light bulb, unplug the refrigerator and locate the light cover inside. Remove the cover, unscrew the old bulb, and replace it with a new one of the same wattage. Reattach the cover and plug the fridge back in.
Yes, some noise is normal as the refrigerator operates. Common sounds include humming, clicking, or the occasional pop. If the noise is loud or unusual, check for loose parts or contact a technician.
The Fagor FS-6A typically does not have a built-in water filter. If your model includes one, follow the manufacturer's instructions for cleaning or replacement. Regularly replace the filter cartridge as recommended.
If the door seal is damaged, it should be replaced to ensure proper sealing and energy efficiency. You can order a new seal from the manufacturer or a parts supplier and follow the installation instructions provided.