Fagor FS-3612IT User Manual

To reset the Fagor FS-3612IT washing machine, unplug the machine from the power source, wait for about 5 minutes, and then plug it back in. This should reset the system.
Ensure that the door is properly closed, the power cord is plugged in, and the water supply is turned on. Check for any error codes on the display and refer to the manual for specific troubleshooting steps.
To clean the filter, first unplug the machine. Locate the filter access door at the bottom of the front panel, open it, and remove the filter by turning it counterclockwise. Rinse the filter under running water and reinstall it by turning it clockwise until secure.
Excessive vibration can occur if the washing machine is not level or if the load is unbalanced. Ensure the machine is on a flat surface and adjust the leveling feet if necessary. Redistribute the load evenly inside the drum.
Regular maintenance should be performed every 3-6 months. This includes cleaning the detergent drawer, checking and cleaning the filter, and running a maintenance wash cycle with a washing machine cleaner to remove detergent and limescale build-up.
Check if the drain hose is kinked or blocked. Inspect and clean the filter for any debris that might be obstructing water flow. If the problem persists, consult the user manual for further troubleshooting steps or contact a service technician.
Yes, the Fagor FS-3612IT has a delicate wash cycle specifically designed for delicate fabrics. Ensure to use a gentle detergent and place delicate items in a laundry bag for added protection.
Residues can be caused by using too much detergent or washing at too low a temperature. Try reducing the detergent amount and periodically run a hot water cycle with a washing machine cleaner to clear residues.
Leave the door and detergent drawer slightly open after each wash to allow air circulation and prevent mold. Regularly clean the gasket with a cloth and a mild detergent. Use a washing machine cleaner monthly to eliminate any odors.
Refer to the user manual for the specific error code meaning and recommended actions. Most error codes can be resolved by checking connections, balancing the load, or cleaning filters. If the error persists, contact customer support.