Fagor FIS-830 User Manual
![Fagor FIS-830 Refrigerator manual cover](/images/SeYeAkkfKkGbifDukAmJMajq/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature control buttons to set your desired levels for both the fridge and freezer compartments.
First, check if the temperature settings are correct. Ensure the doors are sealing properly and that the vents inside the fridge are not blocked. If the issue persists, consider cleaning the condenser coils or contacting a technician.
It is recommended to clean the condenser coils every 6 months to ensure efficient operation.
Yes, the door swing direction on the Fagor FIS-830 can be changed. Refer to the user manual for detailed instructions on how to perform this task safely.
To defrost the refrigerator, turn it off and remove all items. Leave the doors open to allow the ice to melt. Use towels to absorb water as it melts, and clean the interior once defrosting is complete.
To replace the light bulb, first disconnect the refrigerator from power. Locate the light cover inside the refrigerator, remove it, and replace the bulb with a new one of the same type and wattage.
Check if the defrost drain is clogged. If so, clear the blockage using a warm water flush or a pipe cleaner. Ensure the refrigerator is level to prevent future pooling.
To maintain energy efficiency, ensure the temperature settings are correct, keep the refrigerator well-stocked but not overloaded, and regularly clean the condenser coils.
The Fagor FIS-830 Refrigerator typically uses R600a refrigerant. Refer to the technical specifications for confirmation.
After a power outage, simply reconnect the refrigerator to the power supply and check that the temperature settings are correct. No special reset procedure is needed.