Fagor FFJ1650 User Manual
![Fagor FFJ1650 Refrigerator manual cover](/images/cJCmfLJNrXWAlDmumLmCcFGr/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control panel inside the refrigerator. Use the up and down buttons to set your desired temperature. Refer to the user manual for optimal settings.
Ensure the vents inside the refrigerator are not blocked and that the door seals are clean and intact. Also, check the thermostat settings and ensure the condenser coils are clean.
The Fagor FFJ1650 is a frost-free model, so manual defrosting is not required. However, if you notice frost buildup, check the door seals and ensure the door is closing properly.
Check to ensure that the refrigerator is level and that there is adequate clearance around it. Also, inspect the interior for loose or vibrating components.
First, unplug the refrigerator. Locate the light bulb cover, unscrew it, and replace the bulb with one of the same wattage. Reattach the cover and plug the refrigerator back in.
Unplug the refrigerator and locate the condenser coils, usually at the back or bottom. Use a vacuum cleaner with a brush attachment to remove dust and debris. Clean every six months for optimal performance.
Check the water supply line for leaks and ensure it is properly connected. Inspect the drain pan and ensure it is not damaged. If the problem persists, consult a technician.
Yes, the door swing can be reversed. Refer to the user manual for step-by-step instructions and ensure you have the necessary tools before starting the process.
Check the freezer temperature settings and ensure they are set correctly. Inspect the door seals for any gaps and ensure the freezer is not overloaded, which can obstruct airflow.
To reset the refrigerator, unplug it from the power source and leave it unplugged for about 5 minutes. Plug it back in and allow the system to stabilize before adjusting the settings.