Fagor FET-6413S User Manual
![Fagor FET-6413S Washing Machine manual cover](/images/EpTobBmGZsidMFSHAwbmbGuE/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, close the door, add detergent to the dispenser, select the desired wash program using the control dial, and press the start button.
Ensure that the door is properly closed, the machine is plugged in, and the water supply is on. Check for error codes on the display and consult the user manual for troubleshooting steps.
Remove the detergent dispenser by pulling it out gently. Wash it under warm water to remove any residue and use a soft brush if necessary. Dry it thoroughly before reinserting it.
Regularly clean the drum, door seal, and detergent dispenser. Check and clean the filter monthly. Ensure the water inlet hoses are not kinked and inspect them for leaks.
Error code E10 indicates a water inlet problem. Check if the water supply is on and the inlet hose is not blocked or kinked. Ensure the water pressure is adequate.
Ensure the washing machine is level and all transit bolts have been removed. Check for even distribution of laundry in the drum and avoid overloading the machine.
Yes, use the dedicated delicate or gentle cycle for delicate fabrics. Place delicate items in a mesh laundry bag for added protection.
Check the drain hose for blockages or kinks. Clean the pump filter located at the bottom front of the machine. Consult the manual if necessary.
Leave the door and detergent dispenser open after each wash to allow air circulation. Clean the door seal regularly and run a monthly maintenance wash at high temperature.
The Fagor FET-6413S has a maximum load capacity of 6 kg for optimal performance. Avoid overloading to ensure thorough cleaning and prevent damage to the machine.