Fagor FET-3106D User Manual
![Fagor FET-3106D Washing Machine manual cover](/images/UvoEjbkdvMaZXddSpysfMVvn/thumbs/thumb175x175.webp)
To reset the Fagor FET-3106D washing machine, unplug the unit from the power outlet, wait for approximately 1-2 minutes, and then plug it back in. This will reboot the machine's system.
Ensure the machine is properly plugged in, the door is securely closed, and the water supply is turned on. Check if the fuse or circuit breaker is functioning correctly.
Remove the detergent drawer by pulling it out and pressing down on the release clip. Rinse it under warm water to remove any detergent residue, and then dry it before reinserting.
Excessive vibration may be due to an unbalanced load or the machine not being level. Ensure the load is evenly distributed and use a leveling tool to adjust the machine's feet.
Error code E03 typically indicates a drainage issue. Check the drain hose for blockages and ensure it is not kinked. Also, inspect and clean the pump filter if necessary.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the door seal, inspecting hoses for wear, and running a hot wash cycle with a washing machine cleaner once a month.
To use the delay start function, select the desired program and press the delay start button to set the delay time. Confirm the selection by pressing the start button.
If the washing machine is not spinning, check if the load is balanced and ensure the door is fully closed. Additionally, inspect the drive belt for any signs of wear or damage.
Leave the door slightly open after each wash to allow the interior to dry. Regularly clean the door seal and run an empty hot wash with a washing machine cleaner to eliminate mold and odors.
Check all hoses for tight connections and inspect them for cracks. Ensure the detergent drawer is not overfilled and the door seal is clean and undamaged.