Fagor FE-539 User Manual
![Fagor FE-539 Washing Machine manual cover](/images/pgOiYjUsZcsGOCToKzgEPEpY/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Next, add the appropriate amount of detergent. Then, select the desired wash program using the control knob, and press the start button to begin the cycle.
Ensure that the machine is properly plugged into a power outlet and that the power is turned on. Check if the door is closed securely. If the problem persists, inspect the fuse or circuit breaker.
Remove the detergent drawer by pulling it out until it stops, then press the release lever to fully remove it. Wash the drawer components in warm water and dry them before reinserting.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Inspect hoses for any signs of wear or leaks and replace them if necessary.
First, check if the drain hose is kinked or blocked. Ensure that the filter is clean and not clogged. If these do not resolve the issue, the pump may require inspection by a professional.
Ensure the machine is level by adjusting the feet. Check that the load is balanced and reduce the load size if necessary. Excessive vibrations can also be caused by an unbalanced drum.
To reset the machine, unplug it from the power source, wait for about one minute, and then plug it back in. This can help resolve minor electronic glitches.
Distribute clothes evenly around the drum, avoiding overloading. Mix large and small items to improve wash effectiveness and reduce the risk of unbalanced loads.
Run a maintenance wash with hot water and vinegar or a washing machine cleaner. Ensure the drum is empty and clean the door seal and detergent drawer to remove any residue causing odors.
Check that the door is sealed properly and the door gasket is clean. Inspect hoses for any cracks or loose connections. Also, ensure the detergent drawer is not overfilled.