Fagor FD-291NF User Manual
![Fagor FD-291NF Refrigerator manual cover](/images/aUprYWxvpBEHnLWiJzMosVhu/thumbs/thumb175x175.webp)
To reset the temperature settings, locate the control panel inside the refrigerator. Press the 'Temp' button to toggle between the fridge and freezer settings, then use the '+' or '-' buttons to adjust the temperature as desired.
First, check if the refrigerator is properly plugged in and the circuit breaker is not tripped. Ensure that the vents inside the fridge are not blocked. If the problem persists, try cleaning the condenser coils at the back of the refrigerator.
To defrost the freezer, remove all food items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally or place a bowl of hot water inside to expedite the process. Once defrosted, clean and dry the interior before plugging it back in.
Unusual noises could be due to the refrigerator not being level, items inside vibrating, or the compressor running. Ensure the fridge is on a flat surface and check for items that may be rattling. If the noise persists, consider contacting a technician.
To change the light bulb, unplug the refrigerator and locate the light cover inside the fridge. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Regular maintenance includes cleaning the condenser coils, checking and replacing door seals if necessary, and ensuring the interior is clean. Also, verify that the temperature settings are optimal.
Check if the drain hole inside the fridge is blocked and clear it with a pipe cleaner. Ensure the refrigerator is level and the door seals are intact. If the issue persists, inspect the water supply line for leaks.
Yes, the door swing can be reversed. Refer to the user manual for step-by-step instructions, which typically involve removing the door, hinges, and handles, then reinstalling them on the opposite side.
To clean the water dispenser, disconnect the water supply and use a mixture of vinegar and water to clean the spout and surrounding area. Rinse thoroughly with clean water before reconnecting the supply.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages in the maker or the supply line. If the problem persists, inspect the water filter for clogs or consider replacing it.