Fagor FD-27AXUK User Manual
![Fagor FD-27AXUK Refrigerator manual cover](/images/CJpyBbWNlKmgTspIGSdnOCbL/thumbs/thumb175x175.webp)
The recommended temperature setting for the Fagor FD-27AXUK refrigerator is 37°F (3°C) for the fridge compartment and 0°F (-18°C) for the freezer.
First, check if the refrigerator is properly plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct and the vents inside the fridge are not blocked. Clean the condenser coils and inspect the door seals for any damage.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow ice to melt. Use towels to absorb water and clean the interior once defrosting is complete.
Check if the drain tube at the back of the refrigerator is clogged and clean it if necessary. Ensure that the refrigerator is level to prevent water from pooling. Also, examine door seals for any gaps that might cause condensation.
It is recommended to clean the condenser coils every 6 to 12 months to maintain optimal performance of the refrigerator.
The Fagor FD-27AXUK refrigerator typically uses an LED bulb for interior lighting. Refer to the user manual for the specific bulb type and replacement instructions.
Locate the water filter compartment inside the refrigerator. Twist the old filter counterclockwise to remove it. Insert the new filter and twist it clockwise until it clicks into place. Run water through the dispenser to clear any air or debris.
A ticking noise can be caused by the defrost timer or the compressor starting and stopping. This is typically normal, but if the noise is loud or persistent, inspect for loose parts or contact a technician for further diagnosis.
The Fagor FD-27AXUK refrigerator is designed for indoor use in a controlled environment. Placing it in a garage could affect its performance due to temperature fluctuations.
To reset the control panel, unplug the refrigerator for about 5 minutes and then plug it back in. This should reset the control panel to its default settings.