Fagor FC-38LA User Manual

To adjust the temperature settings, locate the control panel inside the refrigerator compartment. Use the up and down buttons to set the desired temperature. Refer to the user manual for recommended temperature ranges.
First, ensure that the refrigerator is plugged in and the power is on. Check that the temperature settings are correct. Clean the condenser coils and ensure there is adequate airflow around the appliance. If the issue persists, contact a professional technician for assistance.
The Fagor FC-38LA is a frost-free model, which means it does not require manual defrosting. However, if you notice frost buildup, check the door seals and ensure they are closing properly.
To clean the interior, remove all food items and shelves. Use a mixture of mild detergent and warm water to wipe down the surfaces. Avoid using abrasive cleaners. Rinse with a damp cloth and dry thoroughly before replacing shelves and food.
Water pooling could be due to a blocked defrost drain. Check the drain hole at the back of the refrigerator and clear any obstructions with a pipe cleaner or warm water. Ensure that the refrigerator is level to allow proper drainage.
To improve energy efficiency, ensure the door seals are tight and free from cracks. Keep the refrigerator full but not overcrowded, allowing air to circulate. Avoid placing hot food inside and limit the frequency of door openings.
Unusual noises can be caused by the refrigerator being unlevel or items vibrating against each other. Ensure the appliance is on a stable surface and check for any loose items inside. If noise persists, consult a technician.
To replace the light bulb, first unplug the refrigerator. Locate the light cover inside the compartment and remove it by twisting or unclipping. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
Organize food by placing items that require lower temperatures, like meats, at the bottom. Store dairy products and beverages on the middle shelves. Use door shelves for condiments and other products that do not require the coldest temperatures.
The water filter should be replaced every six months or as indicated by the filter change indicator on the control panel. Regular replacement ensures optimal water quality and flow.