Fagor FA256 User Manual
![Fagor FA256 Refrigerator manual cover](/images/QhOyjCjCrCQXlBhIUZCmIDmh/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
First, check if the appliance is plugged in and the thermostat is set to the correct temperature. Ensure the door seals are clean and intact. If the issue persists, consider cleaning the condenser coils or contacting a professional technician.
The Fagor FA256 is typically a frost-free model. However, if you notice ice build-up in the freezer, manually defrost it by turning off the unit and letting the ice melt. Clean and dry the compartment before restarting.
Clean the interior with a mild detergent and warm water. Avoid using abrasive cleaners or solvents. Remove shelves and drawers for easier cleaning, and ensure they are fully dry before replacing them.
Check if the refrigerator is level and stable. Inspect the fan and compressor for obstructions. If the noise persists, it may be due to a faulty part, and you should contact a service technician.
Water leakage can be caused by a blocked defrost drain or a damaged door seal. Clean the drain with warm water and ensure the seals are intact and free from debris.
First, unplug the refrigerator. Locate the light cover inside the compartment and remove it. Unscrew the old bulb and replace it with a new one of the same wattage. Reattach the light cover and plug the refrigerator back in.
Check for obstructions around the door and ensure the refrigerator is level. Inspect the door seal for damage or dirt that might prevent it from closing. Clean or replace the seal if necessary.
Yes, the door swing can be reversed. Consult the user manual for detailed instructions or contact a professional if you are not confident in performing this task.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the thermostat at the recommended setting, and avoid overloading the compartments. Regularly clean the condenser coils for optimal performance.