Fagor ES34 User Manual
![Fagor ES34 Dishwasher manual cover](/images/cKvUtUvaKXzmxxkvFYUNZKNP/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher, add detergent, close the door, select the desired cycle using the control panel, and press the start button.
Check if the drain hose is kinked or blocked. Inspect the sink drain for clogs, and ensure the dishwasher filter is clean.
Remove the lower dish rack, twist and lift out the filter located at the bottom of the dishwasher, rinse it under warm water, and replace it securely.
Ensure you are using the correct amount of rinse aid. Hard water can cause spots, so adjust the rinse aid dispenser settings if necessary.
Clean the filter monthly, check and clean spray arms every few months, and run an empty cycle with a dishwasher cleaner every six months.
Ensure the door is fully closed and latched, check if the dishwasher is plugged in, and verify that the circuit breaker is not tripped.
No, using regular dish soap can cause excessive suds and damage the dishwasher. Always use detergent specifically designed for dishwashers.
Use rinse aid to enhance drying, select a heated dry option if available, and ensure that dishes are loaded properly to allow water to drain.
Check for loose items inside the dishwasher, ensure the spray arms are not obstructed, and verify that the dishwasher is level.
Consult the user manual for the specific reset procedure, as it may vary by model, but generally involves pressing a combination of buttons on the control panel.