Fagor CFB-9000AV User Manual
![Fagor CFB-9000AV Hood manual cover](/images/PjwOTSLjQncJYeEaSuZHpGiQ/thumbs/thumb175x175.webp)
To clean the grease filters, first remove them from the hood. Soak them in warm, soapy water and gently scrub with a soft brush. Rinse thoroughly and let them dry completely before reinstalling.
Check if the hood is properly plugged in and the circuit breaker is not tripped. If the problem persists, inspect the internal fuse and replace it if necessary.
Ensure that the hood is securely mounted and all screws are tightened. Check for any obstructions in the ductwork that may be causing noise. Regular maintenance and cleaning can also help reduce noise.
Charcoal filters should typically be replaced every 3 to 6 months, depending on the frequency of use. Refer to the user manual for specific guidelines.
Ensure that the charcoal filters are installed and replaced regularly. Operate the hood at a higher speed setting while cooking to improve odor removal.
Turn off the hood and allow the bulb to cool. Remove the light cover, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover securely.
Clean or replace the grease and charcoal filters, as clogged filters can reduce suction. Check for blockages in the ductwork and ensure that it is properly connected.
Regularly clean the grease filters, replace charcoal filters as needed, check and clean the fan blades, and inspect the ductwork for obstructions.
Yes, the hood can be installed in a recirculating mode using charcoal filters. This setup does not require external venting.
After cleaning or replacing the filters, press and hold the reset button on the control panel for a few seconds until the indicator light turns off.