Fagor 7CFD-60X User Manual
![Fagor 7CFD-60X Hood manual cover](/images/JOxckWdeuqhjbDEhjfVviGgp/thumbs/thumb175x175.webp)
To clean your Fagor 7CFD-60X hood, regularly wipe down the exterior with a damp cloth and mild detergent. Ensure the hood is turned off and cool before cleaning. For the filters, remove and wash them in warm, soapy water every month to maintain optimal performance.
If the extraction power decreases, check if the filters are clogged and need cleaning. Also, ensure that the duct system is not blocked. If these solutions do not help, consult the user manual or contact a professional technician.
To change the light bulb, first unplug the hood. Remove the cover of the light compartment, then carefully take out the old bulb. Replace it with a new bulb of the same type and wattage, and reattach the cover.
Unusual noises can be caused by loose parts or debris in the fan. Check for any unsecured screws or objects in the fan area. If the noise persists, it may require professional servicing.
For light cooking, use the lowest fan setting. Medium settings are suitable for boiling or frying, while the highest setting is best for grilling or cooking with lots of steam and smoke. Adjust according to your needs.
To reset the control panel, turn off the hood and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on. This should reset the control panel.
Some condensation build-up can occur, especially in humid environments or during extensive cooking. Ensure proper ventilation in your kitchen and regularly check and clean the filters to reduce condensation.
Installation involves mounting the hood on the wall and connecting it to ducting that leads outside. Ensure you follow the guidelines in the installation manual and comply with local electrical and building regulations. It may be best to hire a professional installer.
Yes, the Fagor 7CFD-60X can be used in recirculating mode without ductwork. However, you will need to install carbon filters to eliminate odors effectively.
The hood uses metal grease filters, which should be cleaned monthly, and carbon filters (if in recirculating mode), which need replacing every 3 to 6 months depending on usage.