Fagor 6H-750NEPOCA User Manual
![Fagor 6H-750NEPOCA Oven manual cover](/images/PSmnvmNepmpQRyUbqBfBjKNw/thumbs/thumb175x175.webp)
To preheat the Fagor 6H-750NEPOCA oven, turn the function selector to the desired cooking mode, set the temperature using the thermostat knob, and wait until the preheat indicator light turns off, signaling that the oven has reached the desired temperature.
Check if the oven is properly plugged in and the circuit breaker is on. Ensure that the timer is set correctly and not on 'auto' mode. If the problem persists, it may require professional service.
For cleaning the interior, remove all racks and trays. Use a non-abrasive cleaner and a soft cloth or sponge. Avoid using harsh chemicals or steel wool as they can damage the surface.
Unusual noises might be due to loose parts or the fan hitting an obstruction. Make sure all parts are securely fastened and the fan is unobstructed. If noises persist, contact a technician.
To replace the oven light bulb, ensure the oven is turned off and cool. Remove the glass cover by turning it counterclockwise, replace the bulb with a new one of the same type, and then replace the cover.
To use the grill function, place the food on the grill pan, set the function selector to grill, and adjust the thermostat to the desired temperature. Keep the oven door slightly open if recommended in the manual.
To set the timer for delayed cooking, select the cooking function and temperature, then use the timer knob to set the desired cooking duration and start time. Make sure the timer is not in 'manual' mode.
Regular maintenance includes cleaning the interior and exterior surfaces, checking and tightening any loose parts, and verifying the functionality of the door seal and hinges.
Yes, you can use aluminum foil to cover dishes to prevent over-browning. However, avoid lining the oven's interior with foil as it can block heat and affect cooking performance.
To calibrate the thermostat, use an oven thermometer to check the accuracy of the temperature settings. If adjustment is needed, refer to the user manual for calibration instructions or contact a professional technician.