Fagor 1FS-10A User Manual

To start a wash cycle, select the desired program using the program selector dial, add detergent to the dispenser, load your laundry into the drum, and press the start button.
Check if the drain hose is kinked or clogged. Ensure the pump filter is not blocked. Clean the filter and hose, then run a test cycle.
Remove the detergent drawer by pulling it out and pressing the release lever. Wash it under running water and use a brush to remove any residue.
Ensure the machine is level by adjusting the feet. Check that the load is balanced and not too heavy on one side.
Run an empty hot wash cycle with a cup of white vinegar or a commercial washing machine cleaner to remove detergent build-up and odors.
Refer to the user manual for the specific error code explanation and follow the recommended troubleshooting steps.
Leave the door and detergent drawer open after each wash to allow moisture to evaporate. Regularly clean the seal and drum.
The recommended load capacity is 10 kg. Avoid overloading to ensure optimal washing performance and prevent damage.
Unplug the washing machine, wait for a few minutes, and then plug it back in. Select the desired program and restart the wash cycle.
Check if you selected a longer program or additional rinse cycles. Ensure that the water supply pressure is adequate and that the filters are clean.